1 / 7

3 Reasons Your AC Is Tripping the Circuit Breaker3 Reasons Your AC Is Tripping the Circuit Breaker

If your air conditioner continues to cause its circuit breaker to trip—well, then you have a bigger problem.

comfortpros
Download Presentation

3 Reasons Your AC Is Tripping the Circuit Breaker3 Reasons Your AC Is Tripping the Circuit Breaker

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 3 Reasons Your AC Is Tripping the Circuit Breaker www.comfortpros.net

  2. If your air conditioner continues to cause its circuit breaker to trip—well, then you have a bigger problem. The trouble might be loose wiring in the electrical panel, or it could come from something wrong with the AC itself.

  3. Dirty Outdoor Coils • The condenser coils in the outdoor cabinet will struggle to release enough heat to the outside of the house if they have a layer of dirt and grime over them. This will increase the heat inside the air conditioning system, forcing it to work harder. The rise in the draw on the electrical system can lead to a tripped circuit breaker. 

  4. Shorted-out motors • Motors are responsible for running the fans and the compressor in the AC. Like any motor, they can overheat and melt the insulation along their wires. The motor will short out, tripping a circuit breaker to prevent an electrical fire. Repair technicians will need to replace the shorted-out motor.

  5. Hard-starting compressor • A compressor is said to be “hard-starting” if it starts requiring too much electrical power to overcome pressure at the start of its cooling cycle. The drain on amps can trip the circuit breaker.  • To overcome this problem, technicians will attach a hard-start kit to the compressor that delivers the necessary extra electrical power when it starts.

  6. Contact Us • 9751 W 44th AveWheatridge Colorado80033 • Phone:303-945-4319 • E-mail:Jeff@comfortpros.net • http://www.comfortpros.net/

  7. Thank You

More Related