1 / 24

Managing PCB Contaminated Building Materials

Managing PCB Contaminated Building Materials . Presented By: Dean Soultanian Director of Proposal Development & Principal in Charge of PCB Remediation Activities March 30, 2011. PCBs In Building Materials. Where they are found ?

conroy
Download Presentation

Managing PCB Contaminated Building Materials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Managing PCB Contaminated Building Materials Presented By: Dean Soultanian Director of Proposal Development & Principal in Charge of PCB Remediation Activities March 30, 2011

  2. PCBs In Building Materials • Where they are found ? • Buildings and structures constructed/renovated from 1950 to 1978. • Masonry joints and painted surfaces of concrete sidewalks and pools.

  3. PCBs In Building Materials • In what building products have we been encountering PCBs? • Common sources • Caulking, grout, sealants, paints, insulation, ceiling tiles, roofing materials, adhesives, gasket materials, transformer/hydraulic oils • Various building related components • Transformers, light bulbs, capacitors and other electrical equipment • Current products manufactured outside the US • Caulking, sealants, adhesives

  4. PCBs In Building Materials • Likely affected areas? • Ceilings • Elevator shafts • Expansion joints • HVAC equipment • Masonry joints • Painted surfaces • Porous surfaces • Roofs • Underlying soil • Window and door frames

  5. Migration Pathways • Where do PCBs leach/spread? • Abutting surfaces • Underlying/surrounding soils • Porous surfaces and substrates (wood, concrete, pavement) • Dust

  6. Are You Renovating or Demolishing? YES NO External Pressure/ Concerns Test: Sampling per EPA Guidelines – PCBs Present ≥ 50ppm Air Sampling YES NO OK YES NO OK Evaluation of Contamination REMEDIATION REQUIRED (Follow EPA Regulations) Confirmatory Testing & Disposal Facility: Acceptance of Waste

  7. Are You Waterproofing, Re-pointing, or Roofing? YES NO You’re off the hook Test: Sampling per EPA Guidelines – PCBs Found ≥ 50ppm NO OK YES OSHA Worker Safety Hazard Notification Remediation Required (Follow EPA Regulations) Confirmatory Testing & Disposal Facility / Acceptance of Waste **If you find it, you need to deal with it!

  8. Testing Guidance • Are you renovating or demolishing a building or structure? (Can be as simples as replacing a window) • Yes • Test due to disposal facility acceptance of waste and OSHA worker safety notification • No • But being pressured to investigate if PCBs are a concern • Perform air sampling by qualified contractor • Keep in mind – waterproofing, replacing roofing, repointing, grouting, and concrete removal can all be sources of PCB contamination

  9. Remediation/Abatement Process • What to do once you find PCBs? • Proper regulatory notification (EPA, State) • Create comprehensive PCB work plan • Select qualified remediation contractor • Experienced and appropriately trained /qualified personnel • Proper personal protection equipment (PPE) • Proper containment procedures • Proper waste management • Proper decontamination of equipment • Proper regulatory reporting

  10. CASE STUDY – Wachusett Dam • Phase 1 – Contaminated Concrete Caulking Remediation • Remediation work plan • 4 month duration • Portable containment shelters • Disposal methodology • Interior containment remediation - HEPA air filtration • PCB sampling and analysis

  11. Phase 1 – Portable Containment Structure Hoisting of portable containment on top of dam.

  12. Phase 1 – Portable Containment Structure Portable containment in-place on top of dam. Workers inside containment structure.

  13. Phase 1 - Railing Decontamination BEFORE DURING AFTER PCBs were detected on the bases of each brass railing post. Contamination was removed to complete restoration.

  14. Phase 1 – Completion Top of dam resurfaced and fully restored.

  15. CASE STUDY – Wachusett Dam • Phase 2 – PCB and Soil Remediation • Remediation work plan • Full abatement of granite dam face within containment • Precision excavation of contaminated soil • Installation of piezometers and instrumentation • Repointing of loose grout • Transportation and disposal

  16. Phase 2 – Dam Face: BEFORE Views of dam face prior to PCB abatement.

  17. Phase 2 – Abatement of the Granite Surface Dam face abatement inside containment and behind secondary curtain.

  18. Phase 2 – Abatement of the Granite Surface Various containment set-up and installations.

  19. Phase 2 – Contaminated Soil Removal Excavation of PCB contaminated soil under adverse conditions due to steep slopes.

  20. Phase 2 – Restoration Restoration activities – repointing, backfilling and slope stabilization.

  21. Phase 2 - Piezometer Drilling Program TMC scope included the installation of 9 piezometers 4 through the base of the dam. TMC developed a value engineering solution for the piezometer installations which reduced the project schedule, cost and risk factors for drilling through the dam structure.

  22. Phase 2 – Piezometer Drilling Program A piezometer is a small-diameter observation well used to measure the hydraulic head of groundwater in aquifers.

  23. Phase 2 – COMPLETE Completion of abatement, base of dam open for public access.

  24. Summary • A well developed PCB work plan is one of the most important steps for EPA acceptance and execution of the abatement/remediation. • Cost savings through Value Engineering solutions. • Highly trained and experienced remediation contractor is key to success. • A teaming relationship with the engineer, consultant, client and remediation contractor is extremely beneficial for successful project execution.

More Related