1 / 7

How to setup VRT-402N with VRT-401/311S?

How to setup VRT-402N with VRT-401/311S?. Outline. Connections Topology VRT-402N setup VRT-401 setup. Connection Topology. Tunneling. VRT-402 Setup. In Security – VPN/ ISEC. Add New Policy. Key in VRT-401’s WAN IP Address. Key in VRT-401’s LAN IP Subnet and the netmask.

david-manning
Download Presentation

How to setup VRT-402N with VRT-401/311S?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to setup VRT-402N with VRT-401/311S?

  2. Outline • Connections Topology • VRT-402N setup • VRT-401 setup

  3. Connection Topology Tunneling

  4. VRT-402 Setup • In Security – VPN/ ISEC Add New Policy Key in VRT-401’s WAN IP Address Key in VRT-401’s LAN IP Subnet and the netmask Key in the pre-share key , example on “12….0” Select the rest configuration where should match to VRT-401. Confirm the settings Save Settings!!

  5. VRT-401 Setup - 1/2 • In VPN -> VPN Polices Key in VRT-402N’s WAN port IP Address. Key in the local IP subnet and mask of VRT-401 Key in the remote IP subnet and mask. I.e. VRT-402N’s subnet Select phase 1 encryption Select phase 2 encryption & key in the pre-share key Select phase 1, 2 PFS group Add a new Policy Save the configuration

  6. VRT-401 Setup - 2/2 • In VPN -> VPN Status Check the VPN status. Here shows the success status

  7. Hint • At VRT-401 • You can check the log to see the information, if you encounter some connection issues. • Connection fail • For most of the time, IF you failed in the connection, it could be IP setup issues. Please do check: • Have you key in the correct WAN IP for both ends. • Have you key in the correct IP Subnet for both ends. • Have you choose the correct Encryption for both ends. Say, Phase 1, phase 2. • This example also applies to: • VRT-311S

More Related