1 / 16

The focusing mirror system

The focusing mirror system. spherical (elliptical) mirror within gap volume for backward refl. plane mirror just beyond radiator for forward reflections . Minimize detector area (~1 m 2 /sector) interference with FTOF. TOF. Low material budget. Reflecting inside. direct &

daw
Download Presentation

The focusing mirror system

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The focusing mirror system • spherical (elliptical) mirror within gap volume for backward refl. • plane mirror just beyond radiator for forward reflections Minimize detector area (~1 m2/sector) interference with FTOF TOF Low material budget Reflecting inside direct & reflected Preliminary studies with mirrors (to reduce instrumented area): - focalization capabilities shown - ring patterns for positive and negative mesons at different angles and momenta reconstructed Different scenarios (refractive index, radiator thickness, mirror geometry) are being explored

  2. Hit prob > 3 10-4 Hit prob

  3. Hybrid ring example: Hit prob > 3 10-3 200 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm Mirror: 14-25o PMTs: UBA Hit prob

  4. LHp-LHk,p : Mirror 14-25o PMTs: UBA 200 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm Low angles more challenging The same with increased number of trials Protons benefit the small number of unfired PMTs whit expected signal (P is small when C=0) -

  5. Average N p.e. : Mirror 14-25o PMTs: UBA 200 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm N p.e. > 5 for reflected rings N p.e. > 12 for direct rings

  6. Average N p.e. : Mirror 14-25o PMTs: UBA 200 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm Mirror is mandatory for positive hadrons and gives benefit for negative hadrons at large angles and small energy Big dot = studies show in the previous slide

  7. Average N p.e. : PMTs: UBA 200 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm Mirror up to 35o: Worse for positive hadrons Better for negative hadrons

  8. Average N p.e. : PMTs: UBA 200 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm Mirror up to 35o: Worse for positive hadrons Better for negative hadrons

  9. Average N p.e. : PMTs: UBA Mirror 14-25o Mirror 14-35o Worse for positive hadrons Better for negative hadrons

  10. LHp-LHk,p : PMTs: UBA Mirror 14-25o Mirror 14-35o Worse for positive hadrons Better for negative hadrons

  11. Average N p.e. : Mirror Angle Coverage (UBA) 100 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm M35 is acceptanble but slightly worse for positive and does not improve at large angles ?!

  12. Average N p.e. : Aerogel thickness (UBA) 100 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm 2-2-10-10-10 cm 3-5-5-10-10 cm With 2-10 middle-angles improve With 3-10 only small angles improve

  13. Average N p.e. : Mirror Semi-axes (UBA) 100 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 2-4-6-8-10 cm Symmetric Ellipsoide Semi-Axes focalizing onto the photon detector best in Npe

  14. Semi-reflective Mirror Different dielectric or thin metalized film to increase the rflection coefficient at 0o (normal) Angle dependence stays with similar Brewster angle Here b=atan(n2/n1) ~ 64o

  15. Semi-reflective Mirror in Geant 4 R and T defined by n1,n2 Only way so far: fake dielectric material with refraction index ~ 5 to modify R/T ratio to fifty-fifty. Brewster angle ~ 79o Put at zero Lobe and Back reflection Diffusion Next: Take lobe and remove spike to play with surface roughness

  16. Average N p.e. : Semi-reflective Mirror (UBA) 100 trials per point Aerogel: - n=1.06 - thick. increasing with radius: 6-6-6-10-10 cm Same performance with Increased aerogel thickness Can improve high angles only

More Related