1 / 24

FIBER REINFORCED CONCRETE IN SHEAR WALL COUPLING BEAMS

FIBER REINFORCED CONCRETE IN SHEAR WALL COUPLING BEAMS. Gustavo J. Parra-Montesinos C.K. Wang Professor of Structural Engineering University of Wisconsin-Madison James K. Wight Frank E. Richart Jr. Collegiate Professor University of Michigan Cary Kopczynski Principal, Cary Kopcyznski & Co.

dennan
Download Presentation

FIBER REINFORCED CONCRETE IN SHEAR WALL COUPLING BEAMS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FIBER REINFORCED CONCRETE IN SHEAR WALL COUPLING BEAMS Gustavo J. Parra-MontesinosC.K. Wang Professor of Structural EngineeringUniversity of Wisconsin-MadisonJames K. WightFrank E. Richart Jr. Collegiate ProfessorUniversity of MichiganCary KopczynskiPrincipal, Cary Kopcyznski & Co.

  2. OUTLINE • Current design practice for coupling beams • Research motivation • Classification of Fiber Reinforced Concretes (FRCs) • Experimental program • Coupling beams • Coupled walls • Implementation of fiber reinforced concrete coupling beams into practice

  3. COUPLED WALLS • Two or more walls connected by short beams referred to as coupling beams • Commonly used in medium- and high-rise structures in combination with RC or steel moment frames

  4. CURRENT COUPLING BEAM DESIGN PRACTICE IN USA • Typical span-to-depth ratios between 1.5 and 3.5 • Diagonal reinforcement, designed to carry the entire shear demand, is required in most cases • Column-type transverse reinforcement must be provided to confine either diagonal reinforcement or entire member • Maximum shear stress of 10√fc’ (psi) • Little longitudinal reinforcement, terminated at the wall near the coupling beam end

  5. TYPICAL COUPLING BEAM DESIGN (Lequesne, Parra and Wight)

  6. MOTIVATION • Reinforced concrete coupling beams require intricate reinforcement detailing to ensure stable seismic behavior, leading to severe congestion and increased construction cost • Use of a material with tension ductility and confined concrete-like behavior should allow for substantial simplification in confinement and shear reinforcement without compromising seismic behavior

  7. FIBER REINFORCED CONCRETE • Concrete reinforced with discontinuous fibers • Commonly used steel fibers have deformations to improve bond with surrounding concrete. However, fibers are ultimately expected to pullout

  8. MATERIAL-RELATED ASPECTS Constituents Concrete matrix in fiber reinforced concrete is made of same constituents used in plain concrete • Aggregates (fine and course) • Cement • Water • Mineral admixtures • Water reducing agents (high-range water-reducing agents)

  9. MATERIAL-RELATED ASPECTS Aggregates • Sufficient fine aggregates to ensure adequate volume of paste • Control volume and size of course aggregate • Increase in course aggregate size has been associated with poor fiber distribution and a reduction in tensile performance • Maximum aggregate size in fiber reinforced concrete used in coupling beams has been limited to ½ in. Workability • For large fiber dosages as used in coupling beams, use self-consolidating mixture or a mixture with high slump (at least 8 in.) prior to addition of fibers

  10. USE OF SELF-CONSOLIDATING HPFRC • Regular concrete matrix (1/2 in. max. aggregate size) • 1.5% volume fraction of high-strength hooked steel fibers (lf=1.2 in.; df = 0.015 in.) (Naaman et al.)

  11. (Naaman et al.)

  12. CLASSIFICATION OF FRCs • Based on bending and tension behavior • Strain hardening vs. softening • Deflection hardening vs. softening (Naaman and Reinhardt 2003)

  13. FIBER REINFORCED CONCRETE IN EARTHQUAKE-RESISTANT COUPLING BEAMS • Fiber reinforced concrete with tensile strain-hardening behavior (HPFRC) and compression behavior similar to well-confined concrete RC HPFRC

  14. FIBER REINFORCED CONCRETE IN EARTHQUAKE-RESISTANT COUPLING BEAMS High-strength hooked steel fibers have been the most investigated fiber type for use in coupling beams Volume fraction = 1.5% (200 lbs/cubic yard)

  15. SLENDER COUPLING BEAMS (ln/h ≥ 2.2)

  16. SLENDER COUPLING BEAM (ln/h = 2.75) • Target shear stress 8-10√f’c , psi • Approximately 25% of shear resisted by diagonal bars , 45% of shear carried by stirrups, and 30% of shear resisted by HPFRC • Transverse reinforcement ratio = 0.56%

  17. SHEAR CONTRIBUTION FROM DIAGONAL BARS CB-1 CB-2 CB-3

  18. ELIMINATION OF DIAGONAL BARS (ln/h ≥ 2.2) COUPLING BEAM BEHAVIOR • Complete elimination of diagonal reinforcement in coupling beams with length-to-depth ratios ≥ 2.2 • No special confinement, except for beam ends • Shear strength up to 10√f’c (psi) (Sektik, Parra and Wight)

  19. SLENDER COUPLING BEAM DESIGN (ln/h ≥ 2.2) COUPLING BEAM BEHAVIOR (Sektik, Parra and Wight)

  20. BEHAVIOR of COUPLING BEAM with NO DIAGONAL BARS (ln/h = 3.3) (Sektik, Parra and Wight)

  21. SLENDER COUPLING BEAM with NO DIAGONAL BARS AT 6% DRIFT (Sektik, Parra and Wight)

  22. BEHAVIOR of COUPLING BEAM with NO DIAGONAL BARS (ln/h = 2.2) (Comforti, Parra and Wight)

  23. CONCLUSIONS – SLENDER COUPLING BEAMS • When diagonal reinforcement was used in slender HPFRC coupling beams, shear resistance provided by that reinforcement was estimated at or below 15% of the total shear, which suggested elimination of diagonal bars in such beams • Diagonal bars can be eliminated in HPFRC coupling beams with ln/h ≥ 2.2 when reinforced with a 1.5% volume fraction of high-strength hooked steel fibers and subjected to shear stress demands up to the upper limit in ACI Building Code

More Related