1 / 10

EXAMPLES OF WATER PUMP FAILURE MODES

EXAMPLES OF WATER PUMP FAILURE MODES. David Lewis Jan 2014. Failure modes. Corrosion Cavitation and Erosion Electrolysis Body damage (Cracking) Dirt or incrustations Excessive use of gasket sealant Impeller cracks Overload (Tension). Corrosion. CAUSE

dewitt
Download Presentation

EXAMPLES OF WATER PUMP FAILURE MODES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EXAMPLES OF WATER PUMP FAILURE MODES David Lewis Jan 2014

  2. Failure modes • Corrosion • Cavitation and Erosion • Electrolysis • Body damage (Cracking) • Dirt or incrustations • Excessive use of gasket sealant • Impeller cracks • Overload (Tension)

  3. Corrosion CAUSE Use of Non specified manufacturer coolant Top up with Water only RESULT Rust contaminates the cooling system and results in leakage.

  4. Cavitation and Erosion CAUSE • Incorrect bleeding of cooling system • Temperature exceeds boiling point RESULT • Loss of flow, holes in casting leading to leakage

  5. CAUSE Low PH value causes acidic action. Incorrect coolant RESULT Reduced flow and over heating Electrolysis

  6. Body Damage (Cracking) CAUSE • Over tightening of bolts • Non sequential tightening of bolts • Porosity (Unlikely) RESULT • Unable to fit pump • Pump leaks in service

  7. Dirt or Incrustations CAUSE • Engine not flushed out when changing cooling system components RESULT • Damages the surface of the mechanical seal.

  8. Excessive use of gasket sealant CAUSE • Over application to ensure it fits first time and doesn’t leak RESULT • Sealant strands detach and force themselves between the unitised seal

  9. Impeller Cracks CAUSE • Poor handling of pumps RESULT • Loss of interference between impeller and centre spigot • Gradual erosion of the impeller

  10. Overload (Tension) CAUSE • Don’t follow vehicle manufacturers instruction • Belief in Automatic tensioners Result • Bearing failure • Extreme Engine damage (Particularly in synchronous drive)

More Related