1 / 41

Permeable Reactive Barriers

Permeable Reactive Barriers. Shu-Chi Chang, Ph.D., P.E., P.A. Assistant Professor 1 and Division Chief 2 1 Department of Environmental Engineering 2 Division of Occupational Safety and Health, Center for Environmental Protection and Occupational Safety and Health

dextra
Download Presentation

Permeable Reactive Barriers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Permeable Reactive Barriers Shu-Chi Chang, Ph.D., P.E., P.A. Assistant Professor1 and Division Chief2 1Department of Environmental Engineering 2Division of Occupational Safety and Health, Center for Environmental Protection and Occupational Safety and Health National Chung Hsing University May 9, 2007

  2. Permeable Reactive Barriers • Technology Background • Types of Barriers • Barrier Emplacement • Barrier Design • Reactive Media Selection • Zero-valent iron • Aquifer oxidation • Aquifer reduction • Microbial Barriers (Biocurtains) • Biostimulation • Bioaugmentation • Conclusions

  3. Permeable Barrier Configuration

  4. Permeable Barrier Configuration

  5. Funnel-and-Gate with Single and Serial Reactive Medium

  6. Installation of Funnel-and-Gate Barrier:funnel walls: sheet-piling; gates: pea gravel and iron zones GW flow

  7. Deep Soil Mixing • Use of augers in series, which simultaneously mixes up soil (permeable barrier) and injects bentonite (impermeable wall) • Depth to 40 m.

  8. Zerovalent Iron • Reaction stoichiometry 3Feo 3Fe2+ + 6e- C2HCl3 + 3H+ + 6e-  C2H4 + 3Cl- ______________________________ 3Feo + C2HCl3 + 3H+  3Fe2+ + C2H4 + 3Cl- • Due to OH- production (from iron-mediated reduction of water), the pH in a reactive cell increases (up to 9) • OH- production increases carbonate dissolution and ferric carbonate (FeCO3) precipitation  Decreases reactivity!

  9. Degradation Rates (Half lives per 1 m2 iron surface per mL)

  10. Barrier Design (based on column tests) • Assume column VOC profile during iron-mediated dechlorination • Required residence time for permeable barrier (based on t3): tw = (1/k)ln(Co/C) • Include correction factor for temp. (Q10 = 2-2.5): tw,corr. • Determine required thickness ‘b’of reactive cell: b = Vx•tw,corr. Note: Vx,reactive cell > Vx,groundwater • Hydraulic conductivity of reactive medium: K = V•L/A•t•h Where V volume discharge, L the length of the reactive medium, A the cross-sectional area, and h the hydraulic head difference

  11. Current Status – Chlorinated Solvents Sites

  12. Microbial Niche Adjustment: Maintaining Oxidizing Subsurface Conditions in Shallow Glacial Aquifer Systems

  13. Microbial Niche Adjustment: Maintaining Reducing Conditions in Shallow Glacial Aquifer Systems

  14. Microbial Niche Adjustment: Maintaining Reducing Conditions in Shallow Glacial Aquifer Systems

  15. Microbial Barriers: Biostimulation 1. Growth Processes Vadose zone: Bioventing Saturated zone: Biosparging Electron acceptor amendments 2. Cometabolic processes/Reductive Dechlorination Vadose zone: Cometabolic bioventing Saturated zone: Electron donor amendments Induction of cometabolic reactions

  16. Bioventing-Principle (i) amendment of unsaturated zone with oxygen or air to stimulate aerobic (heterotrophic) degradative mechanisms ---> only pertains to compounds which are aerobically degradable (e.g. alkanes, aromatic compounds, lesser chlorinated compounds) (ii) promote volatilization of subsurface contaminants (vapor pressure approx. 1 mm Hg) ---> does not apply to long-chain alkanes (> C10), polycyclic aromatic hydrocarbons (PAH), polysubstituted aromatic compounds note: oxidation of the high molecular weight compounds using ozonation has been considered as a pretreatment ---> not effective for contaminants with vapor pressures less than 1 atm, such as short chain alkanes (> C5), and lesser chlorinated alkyl halides (e.g. vinyl chloride, C2H5Cl). These will volatilize before the onset of biodegradation. (iii) promote redistribution of the pollutant within soil pores ---> restricted applicability in clayey soils

  17. Impact of Physical-Chemical Properties on the Potential for Bioventing

  18. Bioventing – Monitoring Strategies (i) in situ respiration tests: measurement of oxygen and carbon dioxide consumption ---> estimation of hydrocarbon removal based on chemical oxygen demand (COD) for hexane note: This results in overestimations as oxygen consumption for respiration is not considered --> estimations based on CO2 evolution usually less reliable due to multitude of sources (organic, inorganic, mineral) (ii) total petroleum hydrocarbon (TPH) concentration in soil gas within the sampling well; using partitioning and homogeneity assumptions, this concentration is converted to mg TPH/kg (or m3) soil (iii) extraction and chromatographic analysis of a statistically representative number of soil samples ---> allows for a differentiation in removal efficiency for different contaminant components within a mixture

  19. Bioventing – Degradation Kinetics (i) typically calculated using a zero-order rate expression, based on oxygen utilization rates Kb = -Ko A Do C/100 where Kb: biodegradation rate (mg/kg.d); Ko: oxygen utilization rate (%/d); A: volume of air in soil (L/kg); Do: density of oxygen gas (mg/L); C: ratio of oxygen to hydrocarbon. (ii) calculated values on the order of 0.02 - 0.1 mg/kg/day obtained depending on contaminant and soil characteristics.

  20. Experimental Configuration for In Situ Respiration Tests

  21. Sample Data Sets for Respiration Tests

  22. In Situ Respiration Tests

  23. Soil Analysis Before and After Venting

  24. Bioventing Efficacy Assessment Based on Respirometric Assays

  25. Isotopic Fractionation During Bioventing Operations

  26. Saturated Zone: Electron Acceptor Amendment – Oxygen (ORC-Regenesis) • manipulation of terminal electron accepting processes to increase the oxidation capacity (OXC) of aquifers with respect to contaminant degradation

  27. ORC Implementation Results

  28. Saturated Zone Amendment • Monitoring strategies: • similar to those suggested for evaluating natural biodegradation processes of hydrocarbons, e.g. transiently accumulating intermediates (alkylbenzenes), aromatic and aliphatic acids, carbon isotope fractionation... • correlations between electron acceptor utilization rates (inorganic species) and hydrocarbon disappearance rates • Degradation kinetics: • generally based on zero- or first-order Monod-type rate expressions, with respect to either contaminant or electron acceptor concentration • depends on which parameter is being monitored • no 'generally-accepted' expression has been adopted

  29. Cometabolic Bioventing - Principle (i) promote aerobic degradation reactions via injection of air or oxygen at sites co-contaminated with petroleum hydrocarbons and chlorinated solvents (ii) take advantage of hydrocarbon-induced cometabolic enzymes which are nonspecific with respect to alkyl halides, e.g. phenol hydroxylase, toluene o-monooxygenase (TOM), toluene dioxygenase (TOD), methane monooxygenase (MMO). (iii) favorable site characteristics: Alkyhalide:BTEX ratio of 1:10 or 1:15, high porosity soils, soil gas O2 conc. < 2 mg/L

  30. Cometabolic degradation of TCE and toluene during cometabolic bioventing

  31. Biomineralization during Cometabolic Bioventing

  32. Monitoring Strategies: similar to bioventing; however, since CO2 and O2 measurements do not provide information on which fraction is derived from alkyl halide mineralization, relative to the hydrocarbon, calculations of reaction stoichiometry are difficult extensive soil and soil gas characterization for chlorinated degradation products such as chloroacetates, ... Biodegradation/Biotransformation Kinetics: based on Monod-type cometabolic transformation models, however, very limited information is available on unsaturated zone biodegradation kinetics (<< rates in the saturated zone) currently being evaluated on a field scale, using ratios of alkyl halide-to-total hydrocarbons of 1:10 - 1:30 (based on laboratory experiments) Cometabolic Bioventing: Efficacy Assessment

  33. Accelerated Dechlorination Principle: based on the assumption that dechlorination reactions in the subsurface are either electron donor- or electron acceptor (i.e. TEAP)- limited ---> provide a source of reducing equivalents to (i) increase the overall electron flux in the environment, and (ii) stimulate specific types of respiration for dehalogenation reactions

  34. Example: HRC amendment

  35. Induction of Aerobic Cometabolic Reactions (i) based on induction of specific cometabolic enzymes (see cometabolic bioventing) present in natural microbial communities using natural (e.g. methane) or regulated (e.g. phenol, toluene) substrates. (ii) promote cometabolic aerobic co-oxidation of alkyl halides with oxygen injection (iii) usually applied using pulsed injection mechanism to (i) prevent excessive microbial growth at the wellhead, (ii) minimize competition between the primary and cometabolic substrate for the same enzyme, and (iii) increase the zone of influence, as the pulse travels with the groundwater.

  36. Example: Moffett Naval Air Station

  37. Moffett NAS: Methane Oxidation

  38. Moffett NAS: Chloroethene Cometabolism

  39. Monitoring Strategies: oxygen and primary substrate utilization formation of chlorinated intermediates (e.g. c-DCE-epoxide, …) Kinetics: cometabolic Monod-type kinetics, based on competitive inhibition reactions; highly dependent on primary-to-cometabolic substrate ratios and enzyme affinities substrate disappearance kinetics product formation observed on the order of hours (alkyl halides) to days (aryl halides) Efficacy Interpretation

  40. Microbial Barriers: Bioaugmentation Bioaugmentation is based on the ecological principle that natural microorganisms have not established a competitive 'niche' (function) for the contaminant. An inoculum has a high rate of success to establish as long as the contaminant is present, and the niche is unoccupied. Requirement for some type of 'tracking mechanism' to establish that the degradation is due to biodegradative activity associated with the inoculum. ---> development of specific metabolic (e.g. Biolog), genetic (e.g. DNA and RNA probes) or physiological (e.g. FAME) fingerprints for the inoculum which can be recognized against 'autochthonous' microorganisms ---> development of bioluminescence probes; e.g luciferase genes coupled to biodegradative genes. Induction of the biodegradative enzymes by long chain aldehydes and alcohols will trigger luciferase expression: ATP + NADH luciferase ADP + NAD+ + l

More Related