1 / 10

PCB Layout Design Narrative

PCB Layout Design Narrative. RCD Laser System Danny Barjum Corey Lane Ryan Scott. Contents. Overview of the PCB PIC constraints nRF2401A constraints (RF Transceiver) BlueSMirF constraints (Bluetooth) Pixart Camera constraints Power Considerations Preliminary board map.

eagan
Download Presentation

PCB Layout Design Narrative

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PCB Layout Design Narrative RCD Laser System Danny Barjum Corey Lane Ryan Scott

  2. Contents • Overview of the PCB • PIC constraints • nRF2401A constraints (RF Transceiver) • BlueSMirF constraints (Bluetooth) • Pixart Camera constraints • Power Considerations • Preliminary board map

  3. Overview of the PCB • PCB is for camera section of device • Small as possible • Independently powered • Two layer board

  4. PIC18 Constraints • Not many constraints • 28 Pin SOIC • By-pass Capacitors

  5. nRF2401A Constraints • Already on its own PCB • Custom footprint needed • No ground plane underneath • Connection to main PCB through either headers or soldered directly.

  6. BlueSMiRF Constraints • Similar to usmirf • Also on it’s own PCB • Custom footprint needed • Placed with headers or mounted on surface with lots of solder

  7. Pixart Camera • Similar to a DIP • Hard to find footprint • Measure dims. using caliper • Custom footprint

  8. Powering the Board • All components require at least 3.3 volts • Battery powered • Haven’t yet decided what battery will best fit our design (i.e. alkaline, Li-ion, etc)

  9. PCB Board Map Batteries PIC18F46J11 RF Transceiver Pixart camera Bluetooth Device

  10. Thank you! Questions?

More Related