1 / 36

Configuring RAID with mdadm

Configuring RAID with mdadm. Raid ?. Redundant Array of Inexpenisve Disks JBOD Raid 0,1,2,3,5,6 Combinations 10,0+1, etc . Raid0 . Striping Non-redundant Focus on speed Multiple disk balance the load 1 disk broken = All data gone. Raid 1 . Mirroring

edmund
Download Presentation

Configuring RAID with mdadm

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Configuring RAIDwith mdadm

  2. Raid ? Redundant Array of Inexpenisve Disks JBOD Raid 0,1,2,3,5,6 Combinations 10,0+1, etc ...

  3. Raid0 Striping Non-redundant Focus on speed Multiple disk balance the load 1 disk broken = All data gone

  4. Raid 1 Mirroring Data is replicated to 2 or more disks 1:1 ratio realtime backup Slow Minimum of 2 disks

  5. Raid5 Striped set with distributed parity or interleave parity requiring 3 or more disks Size = n disks – 1 Data is not destroyed if one disk is lost Due to parity recalculation the spare can be rebuilt

  6. Raid 6 Striped set with dual distributed parity Becomes more important Can recover diskfailures up to 2 drives Important while rebuilding large drives

  7. Raid-combinations Raid 1+0 = Mirror of striped sets (Raid10) Raid 0+1 = Striping of mirrors

  8. Comments RAID is NOT backup !!! Keep rsync or cold backups ! Hot spare Software Raid vs Hardware Raid Detailed information on next url : http://nl.wikipedia.org/wiki/Redundant_Array_of_Independent_Disks

  9. Installation Follow normal installation steps until you get to the partitioning wizard There you choose manual partitioning

  10. Repeat partitioning Repeat slides 6 through 12 to complete the partitioning scheme The result should be as the following slide

  11. Finish MD configuration Repeat slides 16 through 20 until you get the result on the next slide You will notice when you’re finished with designating MD devices, when you have selected all pairs Then select “Finish”

  12. Finish installation Continue finishing your installation if it were a normal one Refer to semester 1 documentation if necessary

  13. MDADM Once rebooted on your new system, install mdadm raid tools Apt-get update && apt-get install mdadm Mdadm - -detail /dev/md? Cat /proc/mdstat dmesg

More Related