1 / 21

Food Packaging & Labeling

Food Packaging & Labeling. Aims. Packaging is a critical component of food products. It protects the product and preserve its quality. Prevents physical damage e.g. knocking, shaking or crushing Prevent contamination from microorganism/ pollution Protects against dehydration and dampness

elysia
Download Presentation

Food Packaging & Labeling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Food Packaging & Labeling

  2. Aims • Packaging is a critical component of food products. • It protects the product and preserve its quality. • Prevents physical damage e.g. knocking, shaking or crushing • Prevent contamination from microorganism/ pollution • Protects against dehydration and dampness • Barrier protection • Extend the shelf-life of foods • Convenience • Consumer information • Attraction Skin function

  3. Barrier Packaging • There are two basic reasons for using barrier material for product packaging; • to keep desirable elements in (such as flavor, aroma or a controlled atmosphere), • to keep undesirable elements out (such as moisture, oxygen or other corrosive gases). • Barrier Packaging is used to keep food fresh, prevent corrosion or rust, extend product shelf life and provide long term preservation.

  4. Protection The aim of packaging is to contain the product and keep it intact. This means that liquid products do not leak and that dry materials, such as flour, do not spill out. It is sometimes necessary to design packaging that is shaped especially to contain a particular food, e.g. egg boxes, so that the product is held securely and well protected from damage.

  5. Labeling Packaging is also designed to be visually stimulating and provide information about the product to help the customer. The information supplied must cover: • the name of the food; • the weight/volume (metric) (unless under 5g); • the list of ingredients in descending order of weight; • how the food should be stored, where appropriate; • the date when the food should be eaten; • genetically modified ingredients and allergens; • the name and address of manufacturer or distributor; • nutrition information on the back of pack (from 2016 onwards).

  6. Consumer information Food assurance schemes have been developed to compliment food legislation. They cover the food chain from farm to fork: • cereals, oilseeds, pulses and sugar; • fruit, vegetables and salad; • milk; • chicken; • beef, lamb and pig meat. Multi-ingredient products must contain at least 65% Red Tractor certified ingredients to be labelled as Red Tractor products.

  7. How does packaging attract customers? Packaging is used as a way of attracting customers to the product in place of the shopkeeper. This is done by using: enticing adjectives to describe the product such as moist, sweet and creamy colourful packaging a photo of the product

  8. Packaging Materials Cans Paper, board, foil Plastics Cellulose Films Glass

  9. Polypropylene is used

  10. Packaging Components Plastic packaging materials has increasingly replaced metal and glass for food and beverage packaging

  11. Advantagesof plastics • lower costs, • lighter in weight, • less apt to break or shatter, • transparent, • flexible, • direct food contact without changing sensory properties, • can be reheated in micro-wave (versus metal) • general consumer preference because of convenience

  12. Disadvantagesof plastics • high gas and water permeability; • absorption of food/beverage flavour; • low heat resistance (many foods require pasteurisation or sterilisation); • not tough enough (brittle); • poor appearance; • migrationof low molecular weight compounds (e.g. monomers).

  13. MIGRATION • In food packaging the term MIGRATION is generally used to describe the transfer of substances from the package to the food. • Substances that are transferred to the food as a result of contact or interaction between the food and packaging material are referred to as migrants.

  14. Migration is a two-way process because constituents of the food can also migrate into the packaging material. • Example: “Scalping” of flavour compounds from fruit juices by plastics. • Also compounds present in the environment that surrounds the packaged food can be absorbed by the packaging and migrate into the food. • Example: perfumes from soaps can be picked up by fatty foods under certain circumstances e.g. on the nature of the packaging materials used for the soap and the food , time of exposure

  15. Polymer materials for food packaging • Polyolefin • The most widely used polymers for food-packaging polyethylene and polypropylene • They are used in direct contact with food since they are chemically inert, thermo-stableand provide an excellent moisture barrier. • They are used either alone, or as the innermost layer of high barrier packaging structures, like polyethylene laminated aluminium cartons.

  16. Polyethylene CH2 ----- CH2 n • Polyethylene is the most popular plastic in the world. • This is the polymer that makes grocery bags, shampoo bottles, film, milk bottles, and children’s toys. • Polyethylenes are extremely tough, flexible, and chemical resistant. • However, their heat resistance, and load bearing capability are limited. • For such a versatile material, it has a very simple structure, the simplest of all commercial polymers. PE formed from the polymerisation of ethylene

  17. Polypropylene Polypropylene’s (PP) chemical structure is very similar to PE, however, on each second carbon atom in the backbone a methyl group is attached CH2----- CH CH3 n Molecular structure of PP. These methyl groups greatly restrict molecular rotation and flexibility, resulting in significantly greater stiffness than PE.

  18. Packaging & environment Is it eco-friendly??

More Related