1 / 12

In-vivo Blood Pressure Sensor

In-vivo Blood Pressure Sensor. Anup Pillai Dhanya Premkumar Nair. Background. Long-Term Implantable Blood Pressure Monitoring System Wireless Battery less In VIVO Blood Pressure Sensing Micro system. Objective. The sensor specified earlier exhibits increased noise levels

fedella
Download Presentation

In-vivo Blood Pressure Sensor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. In-vivo Blood Pressure Sensor Anup Pillai Dhanya Premkumar Nair

  2. Background • Long-Term Implantable Blood Pressure Monitoring System • Wireless Battery less In VIVO Blood PressureSensing Micro system

  3. Objective • The sensor specified earlier exhibits increased noise levels • The transmitter of the same dissipated 80% of the system power • Our objectives are: a) To find a solution that will exhibit less noise levels b) To find ways of having a more power efficient transmitter for the sensor

  4. Timelines

  5. Objective 1 • To find a solution which exhibits less noise levels • We began by investigating the reason for the high noise levels in the current design

  6. Reason for noise • Animal body vapor penetration into the device • Affect the functioning of the electrical connections within the sensor.

  7. The in vivo blood pressure sensor inside an actual lab rat

  8. The damage caused • The high impedance node can be highly sensitive to vapor penetration • Electrical connections between the sensor diaphragm and IC chip

  9. Solution proposed • Protection for moisture penetration is required for the sensor diaphragm as well as the electrical connections between the sensor diaphragm and IC chip.

  10. Solution proposed: • A passivation layer, such as silicon dioxide (SiO2) and silicon nitride (Si3N4), can be deposited on the top of diaphragm. • An encapsulant material with strong moisture resistance can be used to protect the bond wires between the sensor and IC before applying silicone passivation layer.

  11. Conclusion • Improve packaging methods • This will enhance the reliability of the micro system for long-term blood pressure monitoring

  12. References • http://etd.ohiolink.edu/view.cgi/Cong%20Peng.pdf?case1228412139 - “Wireless Battery less in Vivo Blood Pressure Sensing Microsystem for Small Laboratory Animal Real-Time Monitoring” Cong, Peng • http://filer.case.edu/djy/publications/Sensor-04-BP.pdf -“Novel Long-Term Implantable Blood Pressure Monitoring System” Peng Cong, Darrin J. Young, and Wen H. Ko • http://resources.metapress.com/pdf-preview.axd?code=t331767305362515&size=largest – “Fibre optic sensors in biomedical sciences” Otto S. Wolfbeis • “Biosensors for real-time in vivo measurements” -George S. Wilson,  and Raeann Gifford

More Related