1 / 7

Fill in info under general tab, click save, then go to the Sub types tab

Fill in info under general tab, click save, then go to the Sub types tab. Accident (spill) or process leak (inc. pinholes) from pipeline/ flowline into drip tray or bund. MOST COMMON Accident (spill) or process leak (inc. pinholes) from pipeline/ flowline onto surrounding land. EXPLANATION

fern
Download Presentation

Fill in info under general tab, click save, then go to the Sub types tab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fill in info under general tab, click save, then go to the Sub types tab

  2. Accident (spill) or process leak (inc. pinholes) from pipeline/ flowline into drip tray or bund MOST COMMON Accident (spill) or process leak (inc. pinholes) from pipeline/ flowline onto surrounding land EXPLANATION OF SUB TYPES Other environmental issue, call MSE/421 Discharging under permit but permit limit exceeded Incorrect moving/ shipping of waste, liquid effluent etc Incorrect dumping of waste

  3. Ensure Incident Owner is completed, check spelling and MU number correct, then go to Consequence tab

  4. Click on ‘recommended’ in pending consequences – this has come from the sub type box you checked

  5. Spills non-reportable unless > 1.2m3. If >1.2m3, contact MSE/421 Select type of leak/spill from the pull down menu Tick cause of leak/spill Click on each tab, fill in relevant info, then click save Add any other info here

  6. Click on the plus sign to add data

  7. Check correct units used, try and use m3 Select material spilled from pull down menu and complete relevant fields Add details if spill/ leak contained in drip tray or bund Second material can be added by clicking on the plus sign Leave this blank unless spill of oil is >1.2m3 (contact MSE/421) Add details if spill/ leak recovered KEEP SAVING DATA

More Related