DIY for How to Refinish a hardwood floor

1. DIY for Refinish a Hardwood Floor BAS Hardwood Floors www.bashardwoodfloor.com

2. Step 1 - Sand the Floor The floor refinisher will use a drum sander to remove the old coatings and level the floor, capturing airborne dust in a bag as he goes. Most will sand following the grain of the wood.

3. Step 2 - Edge the Floor To access hard-to-reach areas (such as corners), the floor refinisher will use a handheld edge sander. He’ll choose sandpaper of the same grit as the drum sander for consistency.

4. Step 2 - Edge the Floor To access hard-to-reach areas (such as corners), the floor refinisher will use a handheld edge sander. He’ll choose sandpaper of the same grit as the drum sander for consistency.

5. Step 3 - Apply Filler The pro will touch up gaps, cracks, and holes with wood filler tinted a similar color to the floor’s before embarking on another round of sanding.

6. Step 3 - Apply Filler The pro will touch up gaps, cracks, and holes with wood filler tinted a similar color to the floor’s before embarking on another round of sanding.

7. Step 4 - Finish the Floor After vacuuming, it’s time to stain the floor and add coats of finish. Both processes require a paint roller or a special applicator that resembles a wide-brimmed mop.

8. Before / After

9. Before / After

10. Before / After

11. Contact Us E- mail : george@bashardwoodfloor.com Contact : 267-970-0890 www.bashardwoodfloor.com