1 / 18

AURORA

AURORA. A erial U nmanned R econnaissance and O perations R esearch A ircraft. Overview – What, Why, and How…. Attempt to design and build the first successful UAV at Florida Tech 4 th Annual AUVSI Student UAV Competition in St. Inigoes, Maryland

gustav
Download Presentation

AURORA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AURORA Aerial Unmanned Reconnaissance and Operations Research Aircraft

  2. Overview – What, Why, and How… • Attempt to design and build the first successful UAV at Florida Tech • 4th Annual AUVSI Student UAV Competition in St. Inigoes, Maryland • Navigate a pre-determined course • Search and recognize targets • Process images autonomously http://my.fit.edu/senior_design/uav

  3. Organizational Chart http://my.fit.edu/senior_design/uav

  4. Overview – Sub-Teams • Structures • Design airframe independently • All mounting points on the plane • Electrical • Using off-the-shelf products • Autonomous flight or remote flight pattern recognition • Payload • Image and data storage • Ground-to-air communications • Autonomous control unit • Ideally air-to-ground communications also http://my.fit.edu/senior_design/uav

  5. Team AURORA • Aspires to create a smaller, more efficient and cost-effective product • Alternative to current products • Off-the-shelf electrical components • Cheaper product • Commerical applications possible http://my.fit.edu/senior_design/uav

  6. Block Diagram http://my.fit.edu/senior_design/uav

  7. Software – Ground Flight Controls http://my.fit.edu/senior_design/uav

  8. Software – Image Processing http://my.fit.edu/senior_design/uav

  9. Interface Specifications & Requirements • Data • Raw Images taken from image • GPS location of each image • Heading and altitude of UAV for each image • Image Manipulation • Images are overlaid together using GPS • Images are matched to digital landscape for elevation info • Output is converted to grayscale • Image Processing • Given patterns are matched to locations on the landscape • Pattern matches are highlighed • GPS location is outputted http://my.fit.edu/senior_design/uav

  10. Testing Procedures: Module 0 Code for regulating power board • Set-up circuit in PSpice and make sure voltages and currents are correct at each output terminal. • Set up different test cases where it creates simulated spikes to see how the devices respond. • Breadboard and test actual voltages and currents correspond to the theoretical values with generic loads before connecting equipment to prevent damage. http://my.fit.edu/senior_design/uav

  11. Testing Procedures: Module 1 Code for taking and storing pictures • Run the program that takes in GPS data and takes pictures saving the data and pictures to compact flash. • Send in generic data where the GPS will connect serially and check if the USB output captures a picture. • Finally check whether the data and picture was saved correctly. Test some outlying data to input as simulated GPS data and check to see if the code functions correctly. http://my.fit.edu/senior_design/uav

  12. Testing Procedures: Module 2 Code for converting images from 3-D to 2-D • Run the program that takes the data from the compact flash. • Use generic input to test whether the system is successful converting the image from 3-D into 2-D. • Once the software has completed this process, a test should be conducted to determine whether the converted was saved correctly into memory. http://my.fit.edu/senior_design/uav

  13. Testing Procedures: Module 3 Code for image recognition • Run the program which uses the previously converted image to look for specified objects. • Using the sample input, test whether the system is able to locate for the objects. • Lastly, check to see if the information on the recognized objects is stored correctly into memory. http://my.fit.edu/senior_design/uav

  14. Risks & Solutions - Technical • Power Board Development may take more time than anticipated due to limited resources and knowledge of power boards • Solution: • More in-depth research is required • More collaboration with structures team is required in order to determine the voltage requirements and also determine a feasible layout for the power board http://my.fit.edu/senior_design/uav

  15. Risks & Solutions - Schedule • Time delay due to technical risks resulting in: • Time delay in ordering the necessary parts • Possibility of not receiving parts on time to build prototype • Time delay in ordering new parts, if necessary • Solution: • Resolve technical risks immediately • Overestimate possible man hours in order to consider time delays http://my.fit.edu/senior_design/uav

  16. Status – Schedule http://my.fit.edu/senior_design/uav

  17. Status – Labor http://my.fit.edu/senior_design/uav

  18. AURORA Questions? Aerial Unmanned Reconnaissance and Operations Research Aircraft

More Related