1 / 19

Introduction to networking

Introduction to networking. Devices. Objectives. Be able to describe the common networking devices and their functionality, including: Repeaters Hubs Switches Bridges Routers. Icons. Repeater. This receives a signal from the network and then repeats it

hall
Download Presentation

Introduction to networking

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to networking Devices

  2. Objectives • Be able to describe the common networking devices and their functionality, including: • Repeaters • Hubs • Switches • Bridges • Routers

  3. Icons

  4. Repeater • This receives a signal from the network and then repeats it • After a distance an electrical signal will lose power (attenuation) • This node increases the power of the signal again

  5. Hub • Multi-port repeater • Shares bandwidth • Prone to collisions • Uses the Ethernet CSMACD technique to govern communication • Cheap • Generally non-configurable

  6. Switch • Based on the Ethernet MAC address this node will forward the data to the correct host/machine • Creates micro-segments • Avoids the CSMACD issues of collision • Bandwidth is not divided between connected hosts • Provides Virtual LAN’s • Can be very basic and very advanced • Advanced models highly configurable

  7. Bridge • Connects two segments of a network together • Only allows data to pass if the destination host/machine is located on the other segment • Preserves bandwidth

  8. Routers • Similar to a bridge • Based on the IP Address this node will forward the data to the correct host/machine • Calculates the ‘best path’ • Also performs a switching function • Uses routing tables • Convergence • Uses routing protocols • Uses ACL’s (Access Control Lists) for security • ‘Knows’ the network • Can be very advanced, highly configurable

  9. Routers • Internal components • D/RAM: storing routing tables, ARP cache, temporary and running memory for the config file • Loses data when powered down • NVRAM: stores backup/startupconfig file • Flash: EPROM, hold OS image, allows OS to be updated, can contain multiple OS’s • ROM: POST, bootstrap and basic OS • Interface: where packets enter and exit router

  10. Routers • Routers can operate at all 7 levels of OSI, but mainly at levels 1-3 • Communication via level 1 and 2 refer to the routers switching function • Routes identify routes via layer 3 • Routers are quite simple physically, but very complicated logically due to its routing logic

  11. Router internal components You will mostly experience the I/O interfaces and the IOS (the configuration file)

  12. Router functions • One physical path must exist between source and destination • Having and using a path are not the same thing! • Source and destination must speak the same language (routed protocol), routers should also speak the same language (routing protocol), and agree on path • Functions therefore are: • Physical interconnectivity • Logical interconnectivity • Route calculation and maintenance • security

  13. Internal components of a 2600 router

  14. Router external connections (2600) WAN interfaces Management ports LAN interfaces WAN connections provide connections through a service Provider to a distant site or the Internet, often a CSU/DSU is required

  15. Management ports • Text based CLI configuration and troubleshooting • Console and auxiliary are used for this (EIA-232 asynchronous serial ports) • Console is the preferred method of configuring as an administrator has access to router despite what state it is in and it allows the administrator to see and start-up messages

  16. Terminal console connection

  17. HyperTerminal settings

  18. Summary • The main devices you will use are: • Switches • Routers • Hosts • Relevant cabling • Cisco Switches and Routers for the CCNA are very advanced and highly configurable

  19. Questions... • ...are there any?

More Related