1 / 3

Jason Atchison, atchiso4@uwm.edu Advisor: Konstantin Sobolev , sobolev@uwm.edu

Structural Health Monitoring Data Acquisition System. Jason Atchison, atchiso4@uwm.edu Advisor: Konstantin Sobolev , sobolev@uwm.edu Co-Advisor: Scott Muzenski , swm@uwm.edu. Arduino board used for initial development Data results compared to HP DAQ Device results

harvey
Download Presentation

Jason Atchison, atchiso4@uwm.edu Advisor: Konstantin Sobolev , sobolev@uwm.edu

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Structural Health Monitoring Data Acquisition System Jason Atchison, atchiso4@uwm.edu Advisor: Konstantin Sobolev, sobolev@uwm.edu Co-Advisor: Scott Muzenski, swm@uwm.edu

  2. Arduino board used for initial development • Data results compared to HP DAQ Device results • New Circuit board designed based off of Arduino Processor Atmega 3204-AD Expanded Design

  3. Once circuit board is connected to the slab electrodes, data is collected and sent to newly programed Arduino Board. This board has the capability to log the data to a hard drive located at the site or send the data wirelessly any ware Or

More Related