1 / 3

Space Distances using Parallax

Analyze and Conclude. Your mission is to find the distance to the light bulb star in the classroom using the parallax shift in a model telescope. Q2. Was your prediction in Step 12 correct? Why or why not? Q3. How did your calculation for Star 1 compare with the actual distance?

helen
Download Presentation

Space Distances using Parallax

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Analyze and Conclude Your mission is to find the distance to the light bulb star in the classroom using the parallax shift in a model telescope. Q2. Was your prediction in Step 12 correct? Why or why not? Q3. How did your calculation for Star 1 compare with the actual distance? Q4. Does parallax shift increase or decrease as an object is moved farther away? Our Telescope Space Distances using Parallax 1. Your “telescope” is a box with a small pinhole on one side. The pinhole represents the lens on the outside of the telescope. The distance between the front of the box (with the pinhole) and the back of the box will be the focal length (the distance from the lens to where an image is focused) of our telescope. January 1st July 1st Paper Diameter of Orbit (distance between pinholes) Q5. What would happen if you kept moving the lamp away from the box? Is there a distance at which you can no longer find the distance to the star? Focal Length 2. Place a sheet of paper inside the box as shown. Hold the paper in place with two paper clips. 3. Darken the room and turn on the star light. 4. Align the box so the left edge of the box lines up with the left edge of the table. Make sure to line up the pinhole with the mark on the tape. 5. With one color, mark the paper where you see a dot of light. Label this dot A. 6. Move the box so the right edge of the box lines up with the right edge of the table. Make sure to line up the pinhole with the mark on the tape. 7. Mark the paper again using a different color to mark the second dot B. Dot B represents the image of the star as seen 6 months later from the other side of Earth’s orbit. Remove the paper. Q6. What are you thinking about now?

  2. Diameter x Focal length Parallax Shift Distance = A B A B Star 2 8. Measure and record the parallax shift (the distance between dots A and B) in millimeters. 9. Measure and record the focal length (distance from the hole (lens) to the back of the box) in millimeters. 10. Measure and record the diameter of orbit (distance between pinholes) in millimeters. 12. Move the lamp further away from the model telescope. The bulb now represents Star 2. Predict what you think will happen to the light images on your paper. _______________________________________________________ 13. Repeat the same process as before to find the distance to Star 2. Calculation Area 11. You now have the same kind of information that early astronomers had to work with. The properties of similar triangles can be used to determine the distance to the star. Find at least three similar triangles in the diagram below. Draw the lines for the triangles and label the distances you known. Analyze and Conclude Q1. What caused the apparent change (parallax shift) in position of the dots of light for each star?

  3. Earth Sun Diameter of orbit (distance between pinholes) Paper Earth Focal length If you take a very distant object (a galaxy, for example) that doesn't move laterally compared to the Earth, you can compare the angle between a star and that galaxy when the Earth is on one side of the Sun and 6 months later when the Earth is on the other side of the Sun. Since the Earth has moved roughly 186,000,000 million miles, you can draw the triangles with that base length and determine the distance to the star with trigonometry.

More Related