1 / 16

Dimensioning part 2 with SolidWorks

Dimensioning part 2 with SolidWorks. ENGR 1182 SolidWorks 09. Today’s Objectives. Review Basic Rules of Dimensioning Extend Basic Rules for more Clarity SW09 In-Class Activity SW09 Out-of-Class Homework Assignment. Formal Drawings.

Download Presentation

Dimensioning part 2 with SolidWorks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Dimensioning part 2 with SolidWorks ENGR 1182 SolidWorks 09

  2. Today’s Objectives • Review Basic Rules of Dimensioning • Extend Basic Rules for more Clarity • SW09 In-Class Activity • SW09 Out-of-Class Homework Assignment

  3. Formal Drawings Definition: Detailed multi-view representations of a finished part Formal Drawing Components: Dimensioning Size and Type of Features Good Practices

  4. Review of Basic Dimensioning Dimensioning is used to define an object so that it could be manufactured and must: • Define the overall size of the part in all 3 dimensions. • Define the size and location of the features of the part in all 3 dimensions.

  5. Review of Basic Dimensioning .75 .5 2 .25 1 R1 1 2 Ø1 1.Overall Size 2.Features Size and Location 1.Overall Size 2.Features Size and Location

  6. Rule 1: Appropriate View Each dimension should be placed in a descriptive or characteristic view without dimensioning to hidden lines

  7. Rule 2: Clarity Dimensions should be located outside the boundaries of the object whenever possible and should be spaced far enough apart to be read clearly

  8. Rule 3: Location of Dimensions • Dimensions that are shared between two views should be located between those views

  9. Rule 4: Cylinders • Positive cylinder (e.g. a rod) – dimension in a view where the side of the cylinder appears as a rectangle. • Negative cylinder (e.g. a hole) – dimension in the view where the cylinder appears as a circle. • A diameter symbol is always required before a numerical value.

  10. Rule 5: Amount of Dimensions • Do not over-dimension or under-dimension an object

  11. Solid Modeling Dimensioning • Hole and Arc Details • Circular features of 360° - include the diameter symbol followed by a numerical value, e.g. ø5.0 • Circular features of < 360° - include the radius symbol followed by a numerical value, e.g. R5.0 • A centermark represents the center of an arc or circle and is used for dimensioning feature locations • Centerlines are used in the view where the circular feature appears as a rectangle Symmetry When symmetry is used to reduce complexity a note must be added Options include: Symmetrical from left to right, front to back, top to bottom

  12. Dimensions can be added using the “Smart Dimension” feature SolidWorks: Adding Dimensions Notes can be added to reduce the number of dimensions by stating symmetry or identifying fillet radii

  13. Dimensions Wrap Up Rules of Dimensioning • Appropriate View • Clarity • Location of Dimensions • Cylinders • Amount of Dimensions Homework Assignment Now dimension the part that was created for Extracted Drawings HW. (Hint: Use Notes for Symmetry and fillet radii)

  14. In-Class Activity Now complete the drawing started previously by adding all necessary dimensions and notes. (Hint: Notice Symmetry)

  15. Important Takeaways • Dimensioning is used to define an object, including the overall size with 3 dimensions and the location and size of part features. • There are important rules for common features of parts including circular features

  16. What’s Next? • Due Next Class: SW09 Out of Class HW • Before next class, you will read about advanced modeling techniques and rapid prototyping. • Take SolidWorks 10 Quiz on readings

More Related