1 / 10

الکترونیک صنعتی

الکترونیک صنعتی. دانشگاه تهران – بهزاد آسائی 1385. ترانزیستور. Bipolar Junction Transistors (BJTs). ترانزیستور. Generic BJT Application Clamped Inductive Load. ترانزیستور. Bipolar Junction Transistors (BJTs). MOSFET I-V Characteristics and Circuit Symbols.

herschel
Download Presentation

الکترونیک صنعتی

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. الکترونیک صنعتی دانشگاه تهران – بهزاد آسائی 1385

  2. ترانزیستور Bipolar Junction Transistors (BJTs) BY: B. Asaei

  3. ترانزیستور Generic BJT Application Clamped Inductive Load BY: B. Asaei

  4. ترانزیستور Bipolar Junction Transistors (BJTs) BY: B. Asaei

  5. MOSFET I-V Characteristics and Circuit Symbols BY: B. Asaei

  6. MOSFET Switching Models for Buck Converter • Buck converter using power MOSFET. • MOSFET equivalent circuit valid for on-state (triode) region operation. • MOSFET equivalent circuit valid for off- state (cutoff) and active region operation. BY: B. Asaei

  7. Turn-on Equivalent Circuits for MOSFET Buck Converter BY: B. Asaei

  8. MOSFET-based Buck Converter Turn-on Waveforms • Free-wheeling diode assumed to be ideal. (no reverse recovery current). BY: B. Asaei

  9. Paralleling of MOSFETs BY: B. Asaei

  10. ارزیابی • As shown in Figure 1.1, a variety of circuitries in power electronics can be produced today with • MOSFETs (Metal Oxide Semiconductor Field Effect Transistors) or IGBTs (Insulated Gate • Bipolar Transistors), which were introduced into the market one by one in the mid 80’s. • Compared to other switchable power semiconductors, such as conventional GTO-thyristors, • these types of transistors have a number of application advantages, such as active turn-off even • in case of short-circuit, operation without snubbers, simple control unit, short switching times • and, therefore, relatively low switching losses. • The production of MOSFETs and IGBTs is comparatively simple and favourable and can easily • be managed by today’s technologies in microelectronics. • It was mainly due to the rapid development of IGBTs and power MOSFETs that power • electronics continued open up new markets, and that their fields of application increased • tremendously at the same time. Bipolar high-voltage power transistors that were still very • common a few years ago, have been almost completely replaced by IGBTs. BY: B. Asaei

More Related