1 / 2

Optimization of amplifier schematics “S6” of Mimosa22/bis

After irradiation the amplifier bias is/could be changed in a not favorable way. This is due to extra current between drain and source of the transistors. Optimization of amplifier schematics “S6” of Mimosa22/bis. MF. MLB. Low-pass filter. ML. feedback.

holland
Download Presentation

Optimization of amplifier schematics “S6” of Mimosa22/bis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. After irradiation the amplifier bias is/could be changed in a not favorable way. This is due to extra current between drain and source of the transistors Optimization of amplifier schematics “S6” of Mimosa22/bis MF MLB Low-pass filter ML feedback The most sensitive point for biasing amplifier is the input in Id out Pdiff / Nwell MA signal current Nwell / Pepi Possible solutions Try to vary transistors parameters (>36 versions) to find less dangerous bias point even if the average gain and noise is not affected Put disabling circuit in each pixel – disable noisy pixels by programming by JTAG Modify basic schematics in 3 different ways

  2. MF MLB Radiation Tolerant Enclosed Layout Transistor Optimization of amplifier schematics “S6” of Mimosa22/bis MF MLB ML Low-pass filter out ML feedback MA in Id out Pdiff / Nwell MA signal current MLB Nwell / Pepi Combination of two changes MLB MF ML MF ML MV Extra voltage shifting transistor MV out out MA MA

More Related