1 / 33

General Laboratory Safety Training

General Laboratory Safety Training. Presented by Martina Schmeling Adapted from UC Davis. Staying safe means that you…. Read labels on containers of chemicals Read Material Safety Data Sheets ( MSDS ) Handle chemicals with care Use correct protective clothing and equipment

hussein
Download Presentation

General Laboratory Safety Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. General Laboratory Safety Training Presented by Martina Schmeling Adapted from UC Davis

  2. Staying safe means that you… • Read labels on containers of chemicals • Read Material Safety Data Sheets (MSDS) • Handle chemicals with care • Use correct protective clothing and equipment • Remember emergency procedures

  3. Chemical Labels • Every container of chemicals is labeled by the manufacturer. • The label will tell you • Name of chemical • Name, address and emergency phone number of manufacturer • Physical and health hazards • Precautionary measures • First-aid instructions • Proper handling/storage instructions

  4. Health Hazards on a Chemical Label • Carcinogen • Highly toxic agent • Toxic agent • Reproductive hazard • Irritant • Corrosive • Sensitizer • Hepatotoxin • Nephrotoxin • Neurotoxin

  5. Typical Precautionary Measureson a Label • Do not breathe vapors • Use in well-ventilated areas • Keep container closed when not in use • Avoid contact with skin • Wash thoroughly with soap and water after handling

  6. Keep away from sparks, heat, and flame • Do notstore near combustible materials • Store in tightly closed container • Remove and wash contaminated clothing promptly • Keep from contact with clothing and other combustible materials

  7. Common Signal Wordson Labels • Danger – Can cause immediate serious injury or death • Warning – Can cause potentially serious injury or death • Caution – Can cause potentially moderate injury

  8. Special Symbols Used on Labels Helps you recognize kind of hazard a chemical could present if you are not careful • Toxicity • Corrosivity (acids and bases) • Ignitability (flammable solvents andcertain solids) • Reactivity (sodium and various water-reactive reagents)

  9. Color and Number Coded Label Systems • Colors represent kind of hazard • Red = fire • Yellow = instability • Blue = health • black= specific hazard& personal protection NFPA-type label 3 4 2 • Numbers show degree of hazard • 0 = Minimal • 1 = Slight • 2 = Moderate • 3 = Serious • 4 = Severe

  10. Color and Number CodedLabel Systems NFPA-type labels • Black = specific hazard • OX = Oxidizer • ACID = Acid • ALK = Alkali • COR = Corrosive • W = Use no water • Other symbols: 3 4 2 COR

  11. Material Safety Data Sheets (MSDS) Provides more detailed information about a chemical, including • Composition, information on ingredients (Section 2) • Hazards identification (Section 3) • First aid measures (Section 4) • Accidental Release measures (Section 6) • Handling and Storage (Section 7) • Exposure controls, personal protection (Section 8) • Stability and reactivity (Section 10) • Toxicological information (Section 11)

  12. MSDS (cont’d) Hazards Identification • Inhalation: Respiratory tract (lungs) through inhalation • Ingestion: Digestive tract through eating or smoking with contaminated hands or in contaminated work areas • Absorption through the skin or eyes: Dermatitis or damage to the liver, kidney, or other organ systems • Injection: Percutaneous injection of a toxic substance through the skin

  13. MSDS (cont’d) Specific possible health hazards: • Acute poisoning (rapid assimilation of substance, i.e., carbon monoxide) • Chronic poisoning (prolonged exposure, i.e., lead poisoning) • Cumulative poisons (numerous chronic exposures, i.e., heavy metals) • Substances in combination (synergistic effect, i.e., exposure to alcohol and chlorinated solvents)

  14. MSDS (cont’d) Potential Health Effects • Eye irritation • Nausea • Dizziness • Skin rashes • Headache • Existing medical conditions possibly aggravated by exposure

  15. MSDS (cont’d) • Emergency/first-aid procedures to follow • Accidental Release Measures • What to do if substance spills and leaks • How to correctly dispose of substance • Equipment/procedures for cleaning upspills and leaks

  16. MSDS (cont’d) Handling and Storage • How to handle and store substance safely • Any other precautions (i.e., grounding containers during transfer of flammables)

  17. MSDS (cont’d) • Exposure Controls, Personal Protection • Respirator • Gloves • Eye protection • Protective clothing • Ventilation • Special work and hygiene practices that should be followed

  18. MSDS (cont’d) • Exposure Limits • Threshold Limit Value (TLV) • TLV-C • TLV-STEL • TLV-TWA • Permissible Exposure Limit (PEL) • Recommended Exposure Limit (REL)

  19. MSDS (cont’d) • Toxicological Information • LC50: median lethal concentration by inhalation in a single exposure over a specified time period • LCLO: lowest reported LC50 • LD50: median lethal concentration by a route other than inhalation

  20. So, what is “highly toxic”? • “Highly Toxic” is indicated by • LD50  50 mg/kg body wt by ingestion to albino rats each weighing between 200 to 300 gmsOR • LD50  200 mg/kg by continuous contact for 24 hrs with skin of albino rabbits each weighing between 2 and 3 kgOR • LC50  200 ppm of gas or vapor inhalation (or 2 mg/L of mist, dust, or fumes) for one hour by albino rats each weighing between 200 to 300 gms

  21. How can an MSDS be “Decoded”? • See the glossary produced by CCOHS http://ccinfoweb.ccohs.ca/help/msds/msdstermse.html

  22. Handle Chemicals with Care • Dispose of chemicals, broken glass, and other waste in approved containers • Clean up broken glass and spills immediately • Keep the lab clean and neat • Store incompatible chemicals in separate storage areas

  23. Chemical Storage • Labs have established separate storage areas for • Flammable and combustible organic liquids and solvents • Acids • Dry poisons, salts, and oxidizers • Bases • Chemicals are stored in • Chemical storage cabinets • Flammable storage refrigerators (No food) • Chemical storage refrigerators/freezers (No food) • On shelves with retaining barriers

  24. Storage Fundamentals • Identify incompatible chemicals – check the Material Safety Data Sheet • Isolate and separate incompatible materials • Isolate by storing in another area or room • Degree of isolation depends on quantities, chemical properties and packaging • Separate by storing in same area or room, but apart from each other

  25. Storage of Flammable and Combustible Liquids • Storage must not limit the use of exits, stairways, or areas normally used for the safe regress of people • Storage must be in: • closed metal containers inside a storage cabinet, or • safety cans, or • an inside storage room Inside storage room

  26. Storage Cabinets • Not more than 60 gal of Class I and/or Class II liquids, or not more than 120 gal of Class III liquids permitted in a cabinet • Must be conspicuously labeled, “Flammable - Keep Fire Away” • Doors on metal cabinets must have a three-point lock (top, side, and bottom), and the door sill must be raised at least 2 inches above the bottom of the cabinet

  27. Use correct protective clothing and equipment • Eye Protection • Safety glasses – flying particles, chemical splashes, dust • Splash goggles – corrosive liquids, solvents, powders • Face Shields – high pressure systems • Respiratory Protection – normally not needed at LUC • Skin and Body Protection • Gloves – see the MSDS • Aprons and lab coats – strong acids and bases • Shoes – always worn in lab, closed toe and closed heel • Hearing Protection – normally not needed at LUC

  28. Do not • Use damaged glassware • Store chemicals near heat, sunlight, or other substances with which they might react • Store materials on floors or other places where people could trip over them • Leave equipment unattended when its operating (unless it is designed to do so or you have an SOP) • Put custodians and fellow workers in danger

  29. If Overexposed to a Hazardous Substance • Get medical help immediately! • Inform your lab supervisor • Check MSDS for first-aid instructions. • Some general guidelines are • Eyes: Flush with water for 15 minutes • Ingestion: Follow label and MSDS instructions • Skin Contact: Stand under emergency shower and remove contaminated clothing immediately • Inhalation: Get to fresh air and get prompt medical attention

  30. Other Emergency Procedures • Fire: call 911, activate building fire alarm; safely use fire extinguisher on small fires • Hazardous Chemical spill (over 1 pint): evacuate the room; close door; call 911; consider evacuation of building

  31. Emergencies can happen, so • Avoid working alone in the lab • Know where emergency phone numbers are posted • Review MSDS • Know where to go and what to do in an emergency • Know the location of the closest safety showers, eyewashes, and fire extinguishers

  32. Chemical Hygiene Plan (CHP) • Outlines specific work practices for all work • involving hazardous substances in the lab • Gives procedures to follow when workingwith hazardous chemicals • Provides details on how your chemical exposure will be monitored and limited • Assures that you have the right personal protective equipment (PPE) • Specifies that some hazardous tasks to be approved in advance by the PI

More Related