1 / 80

Digital Integrated Circuits A Design Perspective

Digital Integrated Circuits A Design Perspective. Jan M. Rabaey Anantha Chandrakasan Borivoje Nikoli ć. Timing Issues. January 2003. Synchronous Timing. Timing Definitions. Latch Parameters. D. Q. Clk. T. Clk. PW m. t su. D. t hold. t d-q. t c-q. Q.

idalee
Download Presentation

Digital Integrated Circuits A Design Perspective

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Digital Integrated CircuitsA Design Perspective Jan M. Rabaey Anantha Chandrakasan Borivoje Nikolić Timing Issues January 2003

  2. Synchronous Timing

  3. Timing Definitions

  4. Latch Parameters D Q Clk T Clk PWm tsu D thold td-q tc-q Q Delays can be different for rising and falling data transitions

  5. Register Parameters D Q Clk T Clk thold D tsu tc-q Q Delays can be different for rising and falling data transitions

  6. Clock Uncertainties Sources of clock uncertainty

  7. Clock Nonidealities • Clock skew • Spatial variation in temporally equivalent clock edges; deterministic + random, tSK • Clock jitter • Temporal variations in consecutive edges of the clock signal; modulation + random noise • Cycle-to-cycle (short-term) tJS • Long term tJL • Variation of the pulse width • Important for level sensitive clocking

  8. Clock Skew and Jitter Clk • Both skew and jitter affect the effective cycle time • Only skew affects the race margin tSK Clk tJS

  9. Clock Skew # of registers Earliest occurrenceof Clk edge Nominal – /2 Latest occurrenceof Clk edge Nominal + /2 Clk delay Insertion delay Max Clk skew 

  10. Positive and Negative Skew

  11. Positive Skew Launching edge arrives before the receiving edge

  12. Negative Skew Receiving edge arrives before the launching edge

  13. Timing Constraints Minimum cycle time: T -  = tc-q + tsu + tlogic Worst case is when receiving edge arrives early (positive )

  14. Timing Constraints Hold time constraint: t(c-q, cd) + t(logic, cd) > thold +  Worst case is when receiving edge arrives lateRace between data and clock

  15. Impact of Jitter

  16. Longest Logic Path in Edge-Triggered Systems TJI + d TSU Clk TClk-Q TLM T Latest point of launching Earliest arrivalof next cycle

  17. Clock Constraints in Edge-Triggered Systems If launching edge is late and receiving edge is early, the data will not be too late if: Tc-q + TLM + TSU < T – TJI,1 – TJI,2 - d Minimum cycle time is determined by the maximum delays through the logic Tc-q + TLM + TSU + d + 2 TJI < T Skew can be either positive or negative

  18. Shortest Path Earliest point of launching Clk TClk-Q TLm Clk TH Data must not arrivebefore this time Nominalclock edge

  19. Clock Constraints in Edge-Triggered Systems If launching edge is early and receiving edge is late: Tc-q + TLM – TJI,1 < TH + TJI,2 + d Minimum logic delay Tc-q + TLM < TH + 2TJI+ d

  20. How to counter Clock Skew?

  21. Flip-Flop – Based Timing Skew Flip-flop delay Logic delay f TSU TClk-Q Flip-flop f = 1 f = 0 Logic Representation after M. Horowitz, VLSI Circuits 1996.

  22. Flip-Flops and Dynamic Logic Logic delay TSU TSU TClk-Q TClk-Q f = 1 f = 0 f = 1 f = 0 Logic delay Precharge Evaluate Precharge Evaluate Flip-flops are used only with static logic

  23. Latch timing When data arrives to transparent latch tD-Q Latch is a ‘soft’ barrier D Q Clk tClk-Q When data arrives to closed latch Data has to be ‘re-launched’

  24. Single-Phase Clock with Latches f Latch Logic Tskl Tskl Tskt Tskt Clk PW P

  25. Latch-Based Design L1 latch is transparentwhen f = 0 L2 latch is transparent when f = 1 f L1 L2 Logic Latch Latch Logic

  26. Slack-borrowing

  27. Latch-Based Timing Skew Static logic f L2 latch f = 1 L1 L2 Logic Latch Latch L1 latch f = 0 Logic Long path Can tolerate skew! Short path

  28. Clock Distribution H-tree Clock is distributed in a tree-like fashion

  29. More realistic H-tree [Restle98]

  30. The Grid System • No rc-matching • Large power

  31. Example: DEC Alpha 21164

  32. final drivers pre-driver 21164 Clocking tcycle= 3.3ns • 2 phase single wire clock, distributed globally • 2 distributed driver channels • Reduced RC delay/skew • Improved thermal distribution • 3.75nF clock load • 58 cm final driver width • Local inverters for latching • Conditional clocks in caches to reduce power • More complex race checking • Device variation tskew = 150ps trise = 0.35ns Clock waveform Location of clock driver on die

  33. Clock Skew in Alpha Processor

  34. tcycle= 1.67ns trise = 0.35ns tskew = 50ps EV6 (Alpha 21264) Clocking 600 MHz – 0.35 micron CMOS • 2 Phase, with multiple conditional buffered clocks • 2.8 nF clock load • 40 cm final driver width • Local clocks can be gated “off” to save power • Reduced load/skew • Reduced thermal issues • Multiple clocks complicate race checking Global clock waveform

  35. 21264 Clocking

  36. ps 5 10 15 20 25 30 35 40 45 50 ps 300 305 310 315 320 325 330 335 340 345 EV6 Clock Results GCLK Skew (at Vdd/2 Crossings) GCLK Rise Times (20% to 80% Extrapolated to 0% to 100%)

  37. EV7 Clock Hierarchy Active Skew Management and Multiple Clock Domains + widely dispersed drivers + DLLs compensate static and low-frequency variation + divides design and verification effort - DLL design and verification is added work + tailored clocks

  38. Self-timed and Asynchronous Design Functions of clock in synchronous design 1) Acts as completion signal 2) Ensures the correct ordering of events Truly asynchronous design 1) Completion is ensured by careful timing analysis 2) Ordering of events is implicit in logic Self-timed design 1) Completion ensured by completion signal 2) Ordering imposed by handshaking protocol

  39. Synchronous Pipelined Datapath

  40. Self-Timed Pipelined Datapath

  41. Completion Signal Generation

  42. Completion Signal Generation

  43. Completion Signal in DCVSL V V DD DD B 0 Start Done B 1 B 0 B 1 In 1 In 1 PDN PDN In 2 In 2 Start

  44. Self-Timed Adder

  45. Completion Signal Using Current Sensing

  46. Hand-Shaking Protocol Two Phase Handshake

  47. Event Logic – The Muller-C Element

  48. 2-Phase Handshake Protocol Advantage : FAST - minimal # of signaling events (important for global interconnect) Disadvantage : edge - sensitive, has state

  49. Example: Self-timed FIFO All 1s or 0s -> pipeline empty Alternating 1s and 0s -> pipeline full

More Related