1 / 80

Young Scientists School on Computational Information Technologies for Environmental Sciences:

Lectures course “ Meteorology applied to Urban Air Pollution Problems ” Alexander Baklanov, Danish Meteorological Institute. Young Scientists School on Computational Information Technologies for Environmental Sciences: “CITES-2005” Novosibirsk, Russia, March 13-19, 2005.

idalee
Download Presentation

Young Scientists School on Computational Information Technologies for Environmental Sciences:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lectures course “Meteorology applied to Urban Air Pollution Problems” Alexander Baklanov, Danish Meteorological Institute Young Scientists School on Computational Information Technologies for Environmental Sciences: “CITES-2005”Novosibirsk, Russia, March 13-19, 2005

  2. Meteorology applied to Urban Air Pollution Problems: Lecture schedule Четверг. 17 марта 2005 года11:00 – 13:00 Лекционные курсы (К/З ИВМиМГ)2. Meteorology applied to Urban Air Pollution Problems. Alexander Baklanov (Danish Meteorological Institute, Denmark)13:00 – 14:30 – Обед14:30 – 15:30 - Лекционные курсы3. Meteorology applied to Urban Air Pollution Problems. Alexander Baklanov (Danish Meteorological Institute, Denmark)15:30 - Практические занятия (компьютерные классы ИВМиМГ, ИВТ СО РАН)Пятница. 18 марта 2005 года9:00 – 13:15 Лекционные курсы (К/З ИВМиМГ)1. Meteorology applied to Urban Air Pollution Problems. Alexander Baklanov (Danish Meteorological Institute, Denmark)11:00 – 11:15 - Перерыв2. Meteorology applied to Urban Air Pollution Problems. Alexander Baklanov (Danish Meteorological Institute, Denmark)13:15 – 14:30 – ОбедПосещение РЦ ПОДОтчеты групп о выполнении практических заданий

  3. Introduction to European research (COST Actions 710, 715, 728, 732, SATURN/EUROTRAC, CLEAR cluster, ACCENT, etc.) Structure of the urban boundary layer Modification of flow and turbulence structure over urban areas The surface energy balance in urban areas The mixing height and inversions in urban areas Evaluation and analysis of European peak pollution episodes European urban experiments (Copenhagen, ESCOMPTE, BUBBLE, etc.) Preparation of meteorological input data for urban air pollution models Integrated modelling : Forecasting Urban Meteorology, Air Pollution and Population EXposure (FUMAPEX) and COST 728 Summary of achievements, gaps in knowledge, recommendations for further research Structure of the Lectures

  4. Technological Advances Remote sensing and other platforms Computer models Homeland Security Atmospheric Transport and Diffusion (ATD) models Health and Safety High impact weather Air quality Why Urban Meteorology Now?

  5. Why do we have to consider the urban effects? What kind of effects?

  6. Urban BL features: • Local-scale inhomogeneties, sharp changes of roughness and heat fluxes, • Wind velocity reduce effect due to buildings, • Redistribution of eddies due to buildings, large => small, • Trapping of radiation in street canyons, • Effect of urban soil structure, diffusivities heat and water vapour, • Anthropogenic heat fluxes, urban heat island, • Internal urban boundary layers (IBL), urban Mixing Height, • Effects of pollutants (aerosols) on urban meteorology and climate, • Urban effects on clouds, precipitation and thunderstorms.

  7. A city can be considered as a protect area for meso scale atmospheric events : • Urban heat island has a positive influence in the winter outdoor thermal comfort and the energy consumption • Urban roughness mitigates wind speed actions on tall buildingsabove the mean roof level But At small scale in the urban canopy, the built environment can induce negative effects: • over speed area around buildings • low diffusion of pollutants in street canyon • Lack of ventilation for indoor and outdoor comfort

  8. Example: effects of storm Lothar (1999) Buildings located downwind of small roughness (sea and open country) had more damages on structure Wind effects on structure % of damages sea Open country urban suburbs

  9. The Urban System (EU 5FP City of Tomorrow) Interactions between the city, human environment and biophysical environment INPUTS Energy Money Food Information Water Raw Materials Manufactured goods HUMAN THE CITY BIOPHYSICAL ENVIRONMENT ENVIRONMENT People Physical Structure Atmosphere & Energy Flows Ethnicity Building Type Hydrological Cycle Politics Layout Soils, Vegetation, Fauna Technology Geology & Landforms OUTPUTS Wastes Employment Liquids Wealth Solids Manufactured Goods Gases Degraded Energy LINKS TO Urban SystemsOTHER Rural Systems Regions Transport Communication From Bridgman et al. (1996)

  10. COST Actions 710, 715, 728, 732, SATURN/EUROTRAC/TRAPOS, CLEAR cluster, FUMAPEX project, ACCENT Network of Excellence, ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ WMO GURME project US EPA/NOAA projects Introduction to European research

  11. COST - European Co-operation in the field of Scientific and Technical Research (http://cost.cordis.lu/src/domain_detail.cfm?domain=7)Domain: Meteorology Harmonisation in the pre-processing of meteorological data for dispersion models – COST710 In the framework of COST, there has been an international action, COST 710, aimed at Harmonisation in the pre-processing of meteorological data for dispersion models. COST 710 has been followed by a related action, COST 715, concerning Urban Meteorology applied to Air Pollution Problems. A somewhat related action, COST 732, will be carried out from 2005 onwards. COST 732 is entitled Quality Assurance and Improvement of Microscale Meteorological Models. Meteorology applied to Urban Air Pollution Problems  -  COST 715 In the framework of COST, an international action has been conducted aimed at increasing knowledge of, and the accessibility to, the main meteorological parameters which determine urban pollution levels. The action was designated initiated COST 715. COST 715 follows a previous action, COST 710.

  12.  Working Group 1: Urban wind field  Working Group 2: Energy Budget and the Mixing height in Urban Areas Working Group 3: Meteorology during peak pollution episodes Working Group 4:  Input Data for Urban Air Pollution Models Meteorology applied to Urban Air Pollution Problems  -  COST 715 (1998 – 2004)

  13. Goals Review and evaluate methods to describe and parameterise the wind field over urban areas from routine meteorological observations: near-surface conditions (roughness sublayer) profile throughout the UBL possibly: distinction between different locations within a city recommendations on what /how Met. Services (and others) should measure in urban areas Methods Review existing methods (theories) for the specific goals above identify existing data sets for the specific goals above identify new data sets develop general semi-empirical relationships for the description of the UWF and related parameters Plans In the longer term, seeking new directions for developing a theory for the urban wind profile Evaluation of the role of alternative tools such as numerical models or remote sensing techniques Working Group 1: Urban wind field

  14. Working Group 2:  The Surface Energy Budget and the Mixing height in Urban Areas Background Urban pollution meteorology is characterised by a number of fundamental parameters and their evolution in time, which all have specific problems as to their monitoring, representativeness, parameterisation and modelling. Within COST-715, WG2 addresses the specific problems in describing the surface energy balance and the mixing height. The surface energy balance and the surface temperature and heat fluxes determine the hydrostatic stability conditions in the lower atmosphere and regulate its strength for mixing pollutants, the mixing height parameter determines the available volume for pollutants mixing.The activities of WG2: To review theoretical concepts of the structure of the urban boundary layer. To review and assess pre-processors, schemes and models for determining the mixing height, the surface energy budget and the stability that are available to the participants. Cases of strong stability and/or windless conditions are of special interest. To review theoretical models together with available field measurements and LES for calculation of the minimum friction velocity and the heat transfer coefficient. Conditions of shear free convection over high roughness are of main importance To identify and review suitable data sets within and outside the group that could be used to test and validate the pre-processors and models. To carry out intercomparisons and to summarise comparisons of different schemes against each other and against data under specific conditions. To assess the influence of the model outputs of certain specific effects such as complex topography, strong heterogeneity, slope effects and canopy trapping on radiative fluxes. To assess the suitability of remote sensing tools to estimate canopy characteristics and surface fluxes. To provide recommendations for the improvement of existing pre-processors and models and for the development of new schemes. To provide recommendations for planning and conducting field campaigns in order to fill the important existing gaps for empirical data of key parameters for urban air pollution. To promote co-ordination of related activities in Europe of presently scattered works, objectives, and responsibilities.

  15. Working Group 3:Meteorology during peak pollution episodes During air pollution episodes pollutant concentrations are highest, and the related adverse health impact on the public should therefore be reliably evaluated. The meteorological conditions prevailing in the course of episodes are at the same time commonly the most difficult to model with the computing tools presently available. European Union nevertheless requires practical measures to be taken, if air quality limit values are exceeded.

  16. CLEAR Cluster of European Air Quality Research http://www.nilu.no/clear Coordinator: Prof. Ranjeet S Sokhi Atmospheric Science Research Group (ASRG) University of Hertfordshire, UK Scientific Officer: Viorel Vulturescu European Commission, DG Research Launched: December 2002

  17. Threefold aim: To improve our scientific understanding of atmospheric processes, composition and pollution variabilities on local to regional scales To provide next generation tools for end users and stakeholders for managing air pollution and responding to its impact To help create a critical mass of expertise and ambition to address future research needs in the areas of air pollution, its impact and response strategies. Aim of CLEAR

  18. Eleven Participating ProjectsFP5, EESD, City of Tomorrow • ATREUS (Coordinator: Dr Agis Papadopoulos, University of Thessaloniki) – Human Potential Research network • - Advanced Tools for Rational Energy Use towards Sustainability with emphasis on microclimatic issues in urban applications • OSCAR (Coordinator: Professor Ranjeet S Sokhi, University of Hertfordshire) • - Optimised Expert System for Conducting Environmental Assessment of Urban Road Traffic • FUMAPEX (Coordinator: Dr Alexander Baklanov, DMI) • Integrated Systems for Forecasting Urban Meteorology, Air Pollution and Population Exposure • ISHTAR (Prof Emanuele Negrenti, ENEA) • - Integrated Software for Health, Transport efficiency and • Artistic heritage Recovery

  19. Eleven Participating ProjectsFP5, EESD, City of Tomorrow • SAPPHIRE (Coordinator: Dr Stuart Harrad, University of Birmingham) • - Source Apportionment of Airborne Particulate Matter and Polycyclic Aromatic Hydrocarbons in Urban Regions of Europe • URBAN AEROSOL (Professor Mihalis Lazaridis, Technical University of Crete) • Characterisation of Urban Air Quality Indoor/Outdoor Particulate Matter Chemical Characteristics and Source-to-Inhaled Dose Relationships • URBAN EXPOSURE (Dr Trond Bohler, NILU) • Integrated Exposure Management Tool Characterising Air Pollution Relevant Human Exposure in Urban Environment

  20. Eleven Participating ProjectsFP5, EESD, City of Tomorrow • BOND (Coordinator: Professor John Bartzis, NCSRD) • Biogenic Aerosols and Air Quality in the Mediterranean Area • MERLIN (Coordinator: Professor Rainer Friedrich, University of Stuttgart) • Multi-pollutant, Multi-Effect Assessment of European Air Pollution Control Strategies: an Integrated Approach • AIR4EU (Coordinator: Professor Peter Biltjes, TNO) – FP6 Project • Air Quality Assessment for Europe: Local to Continental Scales • INTEGAIRE (Coordinator: Dr Eva Banos, EUROCITIES) • - Integrated Urban Governance and Air Quality Management in • Europe

  21. CLEAR 20 Partner Countries

  22. FUMAPEX:Integrated Systems for Forecasting Urban Meteorology, Air Pollution and Population ExposureProject objectives: • the improvement of meteorological forecasts for urban areas, • the connection of NWP models to urban air quality (UAQ) and population exposure (PE) models, • the building of improved Urban Air Quality Information and Forecasting Systems (UAQIFS), and • their application in cities in various European climates.

  23. UAQIFS: Scheme of the suggested improvements of meteorological forecasts (NWP) in urban areas, interfaces to and integration with UAP and PE models

  24. FUMAPEX target cities for improved UAQIFS implementation • #1 – Oslo, Norway • #2 – Turin, Italy • #3 – Helsinki, Finland • #4 – Valencia/Castellon, Spain • #5 – Bologna, Italy • #6 – Copenhagen, Denmark • Different ways of the UAQIFS implementation: • urban air quality forecasting mode, • urban management and planning mode, • public health assessment and exposure prediction mode, • urban emergency preparedness system.

  25. FUMAPEX: Forecast procedure in Oslo Met.no

  26. COST 728: Enhancing meso-scale meteorological modelling capabilities for air pollution and dispersion applications (2004-2009) The Action will encourage the advance of the science in terms of parametrisation schemes, integration methodologies/strategies, air pollution and other dispersion applications as well as developing model evaluation methods. In terms of air pollution applications it is recognised that chemical mechanisms and emissions pre-processing are vital components. Four working groups (WG): WG1 Meteorological parameterisation/applications WG2 Integrated systems of MetM and CTM: strategy, interfaces and module unification WG3 Mesoscale models for air pollution and dispersion applications WG4 Development of evaluation tools and methodologies

  27. WG2: Integrated systems of MetM and CTM/ADM: strategy, interfaces and module unification • The overall aim of WG2 will be to identify the requirements for the unification of MetM and CTM/ADM modules and to propose recommendations for a European strategy for integrated mesoscale modelling capability. • WG2 activities will include: • Forecasting models • Assessment models

  28. Meteorology and Air Pollution:as a joint problem Meteorology is a main source of uncertainty in APMs => needs for NWP model improvements Complex & combined effects of meteo- and pollution components (e.g., Paris, Summer 2003) Effects of pollutants/aerosols on meteo&climate (precipitation, thunderstorms, etc) Three main stones for Atmospheric Environment modelling: Meteorology / ABL, Chemistry, =>Integrated Approach Aerosol/pollutant dynamics(“chemical weather forecasting”) Effects and Feedbacks

  29. European mesoscale MetM/NWP communities: ECMWF HIRLAM COSMO ALADIN/AROME UM --------- WRF MM5 RAMS European CTM/ADMs: a big number problem oriented not harmonised (??) ….. Why we need to build the European integration strategy? • NWP models are not primarily developed for CTM/ADMs and there is no tradition for strong co-operation between the groups for meso/local-scale • the conventional concepts of meso- and urban-scale AQ forecasting need revision along the lines of integration of MetM and CTM • US example (The models 3, WRF-Chem) • A number of European models … • A universal modelling system (like ECMWF in EU or WRF-Chem in US) ??? • an open integrated system with fixed architecture (module interface structure)

  30. ACCENT's goals are to promote a common European strategy for research on atmospheric composition change, to develop and maintain durable means of communication and collaboration within the European scientific community, to facilitate this research and to optimise two-way interaction with policy-makers and the general public. Changes in atmospheric composition directly affect many aspects of life, determining climate, air quality and atmospheric inputs to ecosystems. In turn, these changes affect the fundamental necessities for human existence: human health, food production, ecosystem health and water. Atmospheric composition change research is therefore fundamental for the future orientation of Europe's Sustainable Development strategy.

  31. Part II: Structure of the urban boundary layer • Vertical structure • Horizontal non-homogeneity • Temporal variability

  32. Lowest layer of the atmosphere Interactions with the earth’s surface are important Diurnal evolution is complicated Turbulence generation by shear and buoyancy is important Fluxes of energy, momentum, and moisture to/from the surface The atmospheric boundary layer

  33. Complicated vertical structure Sub-layers grow and decay over the diurnal cycle Turbulence is often intermittent, complicating the classification of stability Boundary layer top is not necessarily at inversion Problems in defining the boundary layer

  34. The structure of the urban boundary layer - meteorological view after T. Oke (1988)

  35. Scales in an Urban Environment

  36. Diurnal evolution of the PBL

  37. Diurnal evolution of urban BL day night

  38. Daytime: Deep mixed layer from surface heating Turbulent eddies on the scale of BL depth Thermally driven flows can develop from spatial variations in surface heating Nighttime: Surface inversion develops from radiational cooling Mixed layer can persist above inversion Turbulence can be intermittent and mix down faster and warmer air Boundary layer characteristics

  39. 1. Obstacles-resolved numerical models - CFD => turbulent closure, bc, geometry, etc. - LES, …, DNS - simple box models 2. Parameterization of sub-grid processes - theoretical - experimental - numerical 3. Downscaling of models / Nesting techniques - NWP-local-scale meteorological models - Mesoscale models – CFD tools - Mesoscale models – Parameterized models Part III: Ways to resolve the UBL structure

  40. Key parameters for urban models of different scales (COST715)

  41. Scheme of the building complex and 6 m height horizontal wind field (after Mastryukov et al.) One example of the first way (CFD)

  42. High-resolution mapping of urban areas • CORINE and PELCOM data up to 250 m resolution • Land-use database with the resolution 25 x 25 meters (DMU) • GIS databases of urban structure (BlomInfo A/S)

  43. Momentum equations for urban canopy model

  44. Two approaches to parameterise the urban canopy effect: • Modifying the existing non-urban (e.g. MOST) approaches for urban areas by finding proper values for the effective roughness lengths, displacement height, and heat fluxes (adding the anthropogenic heat flux, heat storage capacity and albedo change). In this case, the lowest model level is close to the top of the urban canopy (displacement height), and a new analytical model is suggested for the Urban Roughness Sublayer which is a critical region where pollutants are emitted and where people live. • Alternatively, source and sink terms are added in the momentum, energy and turbulent kinetic energy equation to take into account the buildings. Different parameterizations (Masson, 2000; Kusaka et al., 2001; Martilli et al., 2002) had been developed to estimate the radiation balance (shading and trapping effect of the buildings), the heat, the momentum and the turbulent fluxes inside the urban canopy, taking into account a simple geometry of buildings and streets (3 surface types: roof, wall and road).

  45. Wind tunnel data for urban canopy

  46. Review: theories relating to urban wind profiles (WG1 COS715) • Theories will be required for various aspects of the UWF: • Roughness sublayer (RS): • profile of Reynolds stress & local scaling within RS è wind profile • no theory, but good results; parameterisation exists for Reynolds stress profile (to be extended to more data sets) • Required: friction velocity of inertial sublayer (IS),    ; z* and d • Stability effects? (profile of sensible heat flux? à WG2) • Urban canopy (part of RS) • Little variation within canopy [height and position] • Sharp transition from canopy to above roof region • Similar to plant canopies: • Theory? (Raupach et al., 1996) • Possible approach: match the canopy and the RS profiles for 0<z<z* • Alternative: sinh formulation (instead of exp): Gayev (??) • UBL • Urban mixed layer: ‘normal‘ BL scaling regimes and approaches? (e.g. Sorbjan, 1986). Any evidence for this? [à data from Barcelona, LIDAR and RaSo may be used: CS]; effects of sea/topography? • Urban stable boundary Layer: see above: UML; data? • rural - urban transition: • (e.g. information (data) from an airport sampling station, but required knowledge in the city centre) • required parameters: scaling velocity / temperature ‘urban‘ and rural. Which level? (see above: RS) • theory? (e.g.                         ; Bottema, 1995) • Model for ‘surface‘ heat flux: based on Oke’s data, empirical • Alternative:       approach for heat flux (based on the notion that this quantity is very much like over rural surfaces even for urban surfaces, see Rotach, 1994) • spatial inhomogeneity: city ‘regions‘ • internal BL growth [thermal – mechanical]: growth rate ‘as usual‘? à test on Barcelona data • city regions (down town, city, residential....): back to IBL?

More Related