1 / 17

An Aerospace Manufacturing Perspective

Aerospace Fastener Applications Part 2. An Aerospace Manufacturing Perspective. Aerospace Rivets. Primarily used to fasten aerospace skins to the sub-structure Concerned mainly with shear and tension loads. Two types of rivets: Solid Rivet Blind Rivet. Aerospace Solid Rivets.

ishmael
Download Presentation

An Aerospace Manufacturing Perspective

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Aerospace Fastener Applications Part 2 An Aerospace Manufacturing Perspective

  2. Aerospace Rivets • Primarily used to fasten aerospace skins to the sub-structure • Concerned mainly with shear and tension loads. • Two types of rivets: • Solid Rivet • Blind Rivet

  3. Aerospace Solid Rivets

  4. Aerospace Solid Rivets

  5. Aerospace Solid Rivets - Identification • Rivets manufactured in accordance with the AN/MS standards are identified by a four part code: • AN or MS specification and head type • one or two letters that indicate the material • shank diameter in 1/32nd inch increments • a dash followed by a number that indicates rivet length in 1/16th inch increments.

  6. Aerospace Solid Rivets - Identification • Example: rivet identification • standard universal head solid rivet • Material: 2117-T4 aluminium • 1/8 inch diameter • 5/16 inch in length • Rivet ID = either AN470AD4-5 or MS20470AD4-5

  7. Aerospace Solid Rivets - Identification • Same rivet, different material:1100 aluminium • AN470A4-5 or MS20470A4-5. • AN470 or MS20470 denote the specification for universal head types • AD is the material code for 2117-T4 • (A=1100, B=5056, C=copper, D=2017, DD=2024, F=stainless and M=Monel) • 4 = 4/32 or 1/8 inch diameter • -5 = 5/16 inch length

  8. Aerospace Blind Rivets • Used when you cannot physically access one side of the work • Blind rivets are hollow, and thus weaker than solid rivets • To retain strength of the joint: • stronger material, larger diameter rivets, or more are necessary and of course • 20–50% heavier than a solid rivet because of steel stem

  9. Aerospace Blind Rivets

  10. Quality Assurance of Aerospace Fasteners • Aerospace Fasteners Material Selection • Aerospace Fasteners Testing

  11. Aerospace Fasteners Material Selection Background • Some factors to be considered before material selection are: • The max. and min. operating temperatures • The corrosiveness of the environment • Fatigue and impact loading • Always try to use standard fasteners, such as AN, MS, MIL, NAS, SAE

  12. Aerospace Fasteners Material Selection • Alloy Steels • Aluminum • Titanium • Stainless Steel • Superalloys

  13. Aerospace Fasteners Material Selection • Aluminum is the predominant material used in the manufacture of commercial aircraft. • Table 3 lists the typical aluminum alloys used in commercial aircraft.

  14. Basic Aerospace Fasteners Application • The basic applications (or needs) for aerospace fasteners are: • Shear • Tension • Fatigue • Fuel tightness • High temperature • Corrosion control

  15. Aerospace Fasteners Testing • Analyzing a Joint • Calculate all the load required for each type of joint failure: • Rivet Shear • Sheet Tensile • Bearing • Sheet Shear • Failure will occur in the mode that corresponds with the lowest load carrying capability.

  16. Aerospace Fastener Standardization • Most aerospace hardware is manufactured per government standards • The three most common aircraft fastener standards used are: • AN = Air Force/Navy • NAS = National Aerospace Standards • MS = Military Standards

  17. Common Standardized Fasteners • Bolts • Nuts • Washers • Turnbuckles • Cotter pins • Screws • Rivets • Plumbing fittings (pipes and tubes)

More Related