1 / 9

Fadal Air/Oil Spindle, SPN-0103A-ITS

Order Fadal 10K Air/Oil Spindle, SPN-0103A-ITS with Locking Drawbar Installed online at ITSCNC. Call us for more information about our 10K Air/Oil Spindle. 800-324-3475

itscnc
Download Presentation

Fadal Air/Oil Spindle, SPN-0103A-ITS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fadal Air/Oil Spindle SPINDLE, AIR/OIL, 10K POZI CLNT-THRU, W/DRAWBAR

  2. FADAL TYPE SPINDLES ITS offers a new Fadal Air/Oil Spindle suitable for any Fadal Machine that has an Air/Oil Spindle System. Our Spindles come complete with the Drawbar installed. The New Fadal Air/Oil Spindle has a polished housing. The Spindle is one of the most important aspects of the machine and the ITS version, Fadal Spindle willl last a long time if installed and maintained correctly.

  3. Product Specification - ITS Part Number SPN-0103A-ITS - 10,000 RPM, Polished Housing - Suitable to use with any Fadal Machine that has an Air/Oil Spindle Pump. - ITS includes a Fitting/O-Ring kit with all of our Spindles. - For 15,000 RPM Spindles order SPN-0107.

  4. SPINDLE, AIR/OIL, 10K POZI CLNT-THRU, W/DRAWBAR

  5. Complete Spindle Support Solution Professional Diagnose: We offer tech support to determine whether your spindle needs to be replaced, or if there are any other issues or concerns. Instruction Manual: We provide an instruction manual containing brief and simple step by step instructions of the installation procedure of the Spindle . The document also contains Preventative Maintenance tips that will help to avoid future failures and allow the Fadal Spindle to run long.

  6. Warranty: All ITS Spindles have a One Year Limited Warranty. Air/Oil Spindles will run a long time as long as oil is being pumped to them and dow frost is chilling it. The premature failure of any spindle caused by customer misuse may result in a repair charge but we usally will never void the warranty entirely. The repair cost is typically $1200.00 to $1500.00. Support Service: Along with our Fadal engineering background and direct interaction with our Spindle Engineers, we will provide you the best product support service not only at the time of installation, but after too.

  7. ITS, NEW & REMAN GREASE PACK SPINDLE ITS spindles are super precision components that require the highest level of care and handling. Our spindles are manufactured and assembled to the highest quality having passed inspection, testing and run-in procedures prior to shipment. Compliance with the recommended care and handling procedures will ensure long spindle life, reliability and the highest quality of performance when placed into service.

  8. FEATURES: GREASE LUBRICATION is widely used in a precision spindle assembly since it provides the simplest and most economical method of lubricating bearings while providing some degree of protection against the ingress of coolant and contaminants. Grease lubrication provides: ♦ Maintenance-free operation ♦ Does not require re-lubrication ♦ Spindles are permanently grease lubricated ♦ Lubricated for life.

  9. Contact Us It is extremely rare for an "ITS" Spindle to fail due to bad parts or in-correct assembly. In almost all cases Spindle failure is the result of one of the reasons listed above. If you have a problem please contact us: www.itscnc.com Call: 1-800-342-3475 Email: parts@itscnc.com Address: 9182 Independence Ave. Chatsworth, Ca. 91311

More Related