1 / 16

Design of a Lightweight Mounted Tip/Tilt Mirror

Design of a Lightweight Mounted Tip/Tilt Mirror . Mike Borden OPTI 523 4/6/09. Design Problem 4: Large Mirror Mount. To Do List. Type of lightweight Mirror material and coating Linear actuator Mount and flexure design. Lightweighting. Contoured Back. Sandwich, and Open Back.

ivory
Download Presentation

Design of a Lightweight Mounted Tip/Tilt Mirror

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design of a Lightweight Mounted Tip/Tilt Mirror Mike Borden OPTI 523 4/6/09

  2. Design Problem 4: Large Mirror Mount

  3. To Do List Type of lightweight Mirror material and coating Linear actuator Mount and flexure design

  4. Lightweighting Contoured Back • Sandwich, and Open Back

  5. Lightweighting

  6. Lightweighting

  7. Mirror Material • Considerations • High stiffness to weight • Ease of manufacture • Minimal thermal stresses • Cost • Main materials being considered • ULE, Zerodur, Fused Silica, Beryllium, Aluminum, BK7

  8. Mirror Material

  9. Mirror Materials

  10. Mirror Material • Possibilities • Pure Beryllium mirror • Expensive and difficult to manufacture • Thermal considerations non-issue • Fused Silica, BK7, Aluminum substrate w/ silver coating • Aluminum w/ silver coating provides smallest ∆𝛂 • (23 ppm / K and 18.9 ppm/ K) • Thermal expansion / contraction an issue • Something crazier – Copper, Brass, Beryllium Copper, Stainless

  11. Optical Specifications • Silver Coating • Meets spectrum requirements

  12. Optical Specifications • Error Budget – 30 nm rms WFE • Mirror surface roughness (∆S) • 20 nm rms • Self weight deflection (δ) • 20 nm rms • Beam diameter • 200 mm diameter mirror accommodates 150 mm beam diameter

  13. Mounting Concept

  14. Mounting Concept

  15. Mounting Concept Invar Sleeve Spherical Bearing Micrometer

  16. Remaining Tasks Verify number of supports Reflectance of Be Tolerance bearings for thermal loading Flexure design – dimensions, material FEA analysis of deflection / thermal loading, resonant frequency Linear actuator / micrometer selection

More Related