1 / 10

DC-DC Fundamentals

DC-DC Fundamentals. 1.1 An Introduction. What is DC-DC converters?. Power supply is needed everywhere Almost all electronic systems need constant voltage supply. data converter. industrial supply. amplifier. A DC-DC converter is the circuit to provide the DC power. DC-DC power converters.

jenn
Download Presentation

DC-DC Fundamentals

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DC-DC Fundamentals 1.1 An Introduction

  2. What is DC-DC converters? Power supply is needed everywhere Almost all electronic systems need constant voltage supply data converter industrial supply amplifier A DC-DC converter is the circuit to provide the DC power DC-DC power converters Sources Loads microprocessor solar cell resistor another converter another converter battery

  3. Types of Converters • Linear Type • The power delivery is continuous from source to load • The pass elements (which regulate the current flow from source to load) operate in the linear region • Switcher Type • The power delivery is in bursts from source to load • The pass elements switch on and off by cycles

  4. Converters Characteristics • System requirements: output voltage, current rating, input voltage range • Efficiency • Steady state operation • Transient response • Size, Cost, …

  5. 5V Pass element 3.3V Error amplifier + Load Gate drive - - + Vref Linear Regulator Applications • Radio frequency or precise analog (measuring very small voltages) circuits that require extremely low ripple & noise • Applications where VIN – VOUT is very small. • Applications that require a precisely regulated. • FPGA or Multi-Core processors that require fast transient response due to fast changes in the load. Advantages Disadvantages • Low O/P ripple & noise • Fast transient response at VOUT on large changes of the Load • Low cost (for low power, at least) • Few external components make the linear regulator easy to design • Since linear regulators don’t switch current into an inductor there is no EMI to worry about • Easy to implement short circuit protection • Low efficiency at VIN>>VOUT which requires a larger supply power source • Power generated from the regulator (VIN – VOUT) * IOUT is dissipated through the Regulator typically requiring a heat-sink • VOUT will always be less than VIN

  6. VIN VOUT Inductive Switcher Applications • Applications where high efficiency (PowerIN – PowerOUT is very small) • Applications with extremely high ambient temperatures such as Industrial or Automotive • Applications where VIN is much larger than VOUT • Applications where the power supply has space constraints (small area) • Applications requiring High output power Buck-Boost Advantages Disadvantages • Since regulation is done by dumping energy into and out of an inductor versus burning power through the regulator • Higher efficiencies can be obtained • Lower power dissipates through the regulator requiring a smaller heat sink. • Topologies of the switching power supply allow VOUT>=<VIN • High Power Density (Watt/cm2) • Allows wider input voltage range • Isolation possible (with transformer) • Multiple O/Ps possible (with transformer) • Switching current into and out of an inductor: • Generates Electromagnetic Interference (EMI) • Causes the output to respond slower to transients in load • Produces higher output ripple & noise • More external components and design variables make switching power supplies difficult to design

  7. Charge Pump Applications • Applications requiring a low output current • Applications with moderate input to output voltage difference • Applications that have space constraints Q1 Q3 CF + VIN VCF + Q4 Q2 Io Advantages Disadvantages + • Moderate Efficiency • Since charge pumps switch voltages across capacitors in and out of the output: • No inductor is needed • VOUT>=<VIN • Fewer components make the charge pump easier to design • Switching of the capacitor in and out of the circuit generates EMI • Since the output of the charge pump is dependent on the charging and discharging of a capacitor, it has limited current capability Co Vo LOAD -

  8. Converter Comparison The choice of converter type depends on the power design priorities.

  9. Summary • Types of DC-DC converter • Basic characteristics of a converter • Converter comparison

  10. Thank you!

More Related