1 / 6

LCLS Motion Control Architecture

LCLS Motion Control Architecture. Angular Position Sensors. Angular Position Sensors. Angular Position Sensors. Angular Position Sensors. Angular Position Sensors. Dry Contact (DC). CA over TCP/IP. Ethernet. Field IOC (motion control /position readouts). Linear Position Sensors. DC.

jimmymosley
Download Presentation

LCLS Motion Control Architecture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LCLS Motion Control Architecture Angular Position Sensors Angular Position Sensors Angular Position Sensors Angular Position Sensors Angular Position Sensors Dry Contact (DC) CA over TCP/IP Ethernet Field IOC (motion control /position readouts) Linear Position Sensors DC Linear Position Sensors Linear Position Sensors Linear Position Sensors Linear Position Sensors Linear Position Sensors Linear Position Sensors RS-232 Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices Motion Drive/Devices • Use modular field IOCs with EPICS Asyn on Linux. • Use field IOC serial interface to control movers, one port per each mover. • Use field IOC power to excite the linear/rotary potentiometers. • Use field IOC onboard ADCs with linear/rotary potentiometers to monitor ID positions. • Use field IOCs to translate the motion vectors. • Use EPICS clients to calibrate the movers.

  2. Field IOC Field IOC’s: Off-the-shelf Integrated Industrial Computer Systems (PC-104 based) with 16 ADC’s (16-bit) for position readouts and 8 RS-232 for motion controls. RT OS: Linux. EPICS 3.14.x w/ Asyn module. Prometheus w/16x16 bit ADCs, Diamond Systems Inc. Size: 5.5”x5.75”x1.7”. Power: 5W. Each ID/Cradle Assembly has one Field IOC

  3. Motion Device Motion Drive/Devices: Servo Motors with RS-232 interfaces. SmartMotors from Animatics Corporations 2 for undulator segment translation. 5 for cradle assembly camshafts.

  4. Linear Position Feedback Linear Position Sensors: Absolute position feedback with 2 microns repeatability and 0.2 micron resolution. Linear transducers (w/2-micron repeatability) from Novotechnik US, Inc. 2 for undulator segment translation and 8 for cradle assembly. With 16 bit readout, the resolution is 0.15 micron.

  5. Rotary Position Feedback Rotary Position Sensors: Absolute position feedback with 0.1 degree repeatability and 0.01 degree resolution. Rotary transducers (w/0.004 degree repeatability) from Novotechnik US, Inc. 5 for cradle assembly camshafts. With 16 bit readout, the resolution is 0.005 degree.

  6. Current Status • Asyn/EPICS/Linux based Field IOC SmartMotor drive development: Completed. • Motor drive unit test: Completed. • Cam Shaft motion control and position feedback system development: In progress. • Client (calibration) tools development: Pending. • Development environment setup: In progress. • Verification environment: Pending. • Network mgnt: Pending. Interface with SLAC IT. • Configuration mgnt: Pending. Interface with LCLS global ctls. • System and network verification: Pending. • Documentation: On going.

More Related