1 / 88

Baseflow Recession

Baseflow Recession. Q 0. Baseflow recession. Q = Q 0 e –at Q = flow at time t after recession started (L 3 /T; ft 3 /s or m 3 /s). Q 0 = flow at the beginning of recession. a = recession constant (1/T; d -1 ). t = time since recession began. (T; d). Meyboom method. V tp = Q 0 t 1 /2.3

jluce
Download Presentation

Baseflow Recession

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Baseflow Recession Q0

  2. Baseflow recession • Q = Q0 e–at • Q = flow at time t after recession started (L3/T; ft3/s or m3/s). • Q0 = flow at the beginning of recession. • a = recession constant (1/T; d-1). • t = time since recession began. (T; d)

  3. Meyboom method • Vtp = Q0t1/2.3 • Vtp = Volume of total potential groundwater discharge during a complete ground water recession (L3, ft3 or m3). • Q0 = baseflow at start of recession (L3/T, ft3/s or m3/s). • T1 = time it takes baseflow to go from Q0 to 0.1Q0

  4. Increase of Recharge • find t1 • tc = 0.2144 t1 • find QA & QB • Vtp = QBt1/2.3 – QAt1/2.3 • G = 2 Vtp

  5. Porosity • Porosity is percent of rock or soil that is void of material. • n = 100 Vv/V • n = porosity (percentage) • Vv= volume of void space (L3, cm3, m3) • V = unit volume of material including voids and solids.

  6. Factors affecting porosity • Packing • Grain-size distribution - sorting

  7. Sediment Classification • Sediments are classified on basis of size of individual grains • Grain size distribution curve • Uniformity coefficient Cu = d60/d10 • d60 = grain size that is 60% finer by weight. • d10 = grain size that is 10% finer by weight. • Cu = 4 => well sorted; Cu > 6 => poorly sorted.

  8. d60 d10 d60 d10

  9. d60 d10 d10 d60

  10. Aquifer • Properties: Porosity, specific yield, specific retention. • Potential: Transmissivity, storativity. • Types: confined, unconfined. • Hydraulic conductivity, Physical Laws controlling water transport.

  11. Specific Yield and Retention • Specific yield – Sy: ratio of volume of water that drains from a saturated rock owing to the attraction of gravity to the total volume of the rock. • Specific retention – Sr: ratio of the volume of water in a rock can retain against gravity drainage to the total volume of the rock. • n = Sy + Sr. • Sr increases with decreasing grain size.

  12. Darcy’s Law

  13. Darcy’s Experiment • Q  ha – hb. • Q 1/L. • Darcy’s Law: Q = -KA(ha-hb)/L. • Q = -KA(dh/dl). • dh/dl = Hydraulic gradient. • dh = change in head between two points separated by small distance dl.

  14. Hydraulic conductivity • K = hydraulic conductivity (L/T). • K is also referred to as the coefficient of permeability. • K = -Q[A(dh/dl)] [ L3/T/[L2(L/L)] = L/T] • V = Q/A = -K(dh/dl) = specific discharge or Darcian velocity.

  15. Factors influencing hydraulic conductivity • Porous medium. • Fluid passing through the medium.

  16. Factors influencing hydraulic conductivity • Q  d2 • Q γ. • Q 1/μ. • d = mean pore diameter. • γ = specific weight. • μ = viscosity.

  17. Darcy’s Law, cont. • Q = -[Cd2γA/ μ](dh/dl). • C = shape factor. • C, d = properties of porous media. • γ and μ = properties of the fluid.

  18. Intrinsic Permeability • Intrinsic permeability Ki = Cd2 (L2). • K = Ki(γ/μ) or K = Ki(ρg/ μ) • Petroleum industry 1 Darcy = unit of intrinsic permeability Ki • 1 darcy = 1 cP x 1 cm3/s / (1 atm/ 1 cm). cP – centipoise - 0.01 dyn s/cm2 atm – atmospheric pressure – 1.0132 x 106 dyn/cm2 • 1 darcy = 9.87 x 10-9 cm2 ~ 10-8 cm2

  19. Factors affecting permeability of sediments • Grain size increases permeability increases. • S. Dev. Of particle size increase poor sorting => permeability decrease. • Coarse samples show a greater decrease of permeability as S. Dev. Of particle size increases. • Unimodal samples (one dominant size) vs. bimodal samples.

  20. Hazen method • Estimate hydraulic conductivity in sandy sediments. • K = C(d10)2. • K = hydraulic conductivity. • d10 = effective grain size (0.1 – 3.0 mm). • C = coefficient (see table on P 86).

  21. Hazen method (General) • K = C(d50)j. • K = hydraulic conductivity. • d50 = effective grain size (mm). • C = coefficient. • j = an exponent (1.5 – 2).

  22. Permeameters • Constant-head permeameter • Qt = -[KAt(ha-hb)]/L. • K = VL/Ath. • V = volume of water discharging in time. • L = length of the sample. • A = cross-sectional area of sample. • h = hydraulic head. • K = hydraulic conductivity

  23. Falling head permeameter • K = [dt2L/dc2t]ln(h0/h). • K = Hydraulic conductivity. • L = sample length. • h0 = initial head in the falling tube. • h = final head in the falling tube. • t = time that it takes for head to go from h0 to h. • dt = inside diameter of falling head tube. • dc = inside diameter of sample chamber.

  24. Aquifer • Aquifer – geologic unit that can store and transmit water at rates fast enough to supply amounts to wells. Usually, intrinsic permeability > 10-2 Darcy. • Confining layer – unit with little or no permeability … < 10-2 Darcy. aquifuge – absolutely impermeable unit. aquitard - a unit can store and transmit water slowly. Also called leaky confining layer. Raritan formation on Long Island. -- all these definitions are in a relative sense.

  25. Aquifer – Cont. • Unconfined aquifer – water-table aquifer.

  26. Aquifer – Cont. • Unconfined aquifer. • Confined or artesian aquifers.

  27. Aquifer – Cont. • Unconfined aquifer. • Confined or artesian aquifers. • Potentiometric surface – surface at which water will rise in a well cased to the aquifer.

  28. Aquifer – Cont. • Unconfined aquifer. • Confined or artesian aquifers. • Potentiometric surface – surface at which water will rise in a well cased to the aquifer. • Perched aquifer.

  29. Aquifer

More Related