1 / 20

Femtosecond Laser Micromachining of BioMEMS

BioMEMS Lab Mechanical and Aerospace Engineering University of Texas Arlington. Femtosecond Laser Micromachining of BioMEMS. Comparison of Micromachining Processes. Laser Micromachining Process. Advantages of Laser Micromachining. Non-contact machining

johnathan
Download Presentation

Femtosecond Laser Micromachining of BioMEMS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. BioMEMS Lab Mechanical and Aerospace Engineering University of Texas Arlington Femtosecond Laser Micromachining of BioMEMS

  2. Comparison of Micromachining Processes

  3. Laser Micromachining Process

  4. Advantages of Laser Micromachining • Non-contact machining • Very high resolution, repeatability and aspect ratios • Localized heating, minimal redeposition • No pre/post processing of material • Wide range of materials: fragile, ultra-thin and highly reflective surfaces • Process can be fully automated

  5. Effect of Laser Micromachining Process Parameters

  6. Characteristics of Femtosecond Laser Micromachining • Very high peak powers in the range 1013W/cm2provide for minimal thermal damage to surroundings • Very clean cuts with high aspect ratios • Sub-micron feature resolution • Minimal redeposition • Possible to machine transparent materials like glass, sapphire etc

  7. Ultrashort Pulses vs. Long Pulse Micromachining Courtesy: Sandia National Labs Ti: sapphire,120fs a) air b) vacuum c) Nd:YAG, 100ns Extremely short pulses provide for minimal thermal damage to surroundings

  8. Femtosecond Laser System at BioMEMS Lab • Spectra PhysicsHurricaneFemtosecond Ti: sapphire Laser • Pulse width: 106fs • Wavelength range: 750nm-850nm • Average energy: 1mJ/pulse • Beam profile: Gaussian • Polarization: linear, horizontal

  9. Femtosecond Laser Micromachining (Preliminary Experimental Testbed)

  10. Additional Equipment for Femtosecond Laser Micromachining • Ultra-high precision 3-axis linear stage assembly by Aerotech Inc . • Ultrafast High Energy Beam Attenuator by Newport Corporation. • Power Meter by Scientech Inc. • 2GHz Oscilloscope by Hewlett Packard Under development • 10-3 Torr, 1m3 Vacuum Chamber with inert gas and electrical and power ports • Fully automated multiple lens changer • LabView based control environment

  11. Preliminary Experimental Results Micromachining in 18μm Thick Aluminum Foil • Array of shots (b) Thru-hole drilled after 33 shots at a pulse energy of 14μJ

  12. Preliminary Experimental Results Single Shots in 18μm Thick Aluminum Foil Focal position Off-focal position

  13. Thru-holes Drilled in 25μm Thick Brass Foil Preliminary Experimental Results 56μJ/pulse 27μJ/pulse

  14. Ablation Rate vs. Energy Density in 18m Thick Aluminum Foil

  15. Optimization of Pulse Energy Required to Drill Thru-Holes

  16. Femtosecond Laser Bonding of Optically Transparent Materials • Explore femtosecond laser bonding of optically • transparent PMMA or glass to a substrate • Automatic lens changer will be used to study the • effect of variable focal length on the bond strength

  17. Laser Intensity Distribution in PMMA Focal length of 9mm Focal length of 40mm

  18. Through the Thickness Intensity Distribution of Transmitted Laser Beam in PMMA Focal length of 9mm Focal length of 40mm

  19. Automation of Laser Micromachining Process

  20. Conceptual Solid Model of Laser Micromachining Setup

More Related