1 / 22

Lecture 3

Lecture 3. OUTLINE Semiconductor Basics (cont’d) Carrier drift and diffusion PN Junction Diodes Electrostatics Capacitance Reading: Chapter 2.1-2.2. Recap: Drift Current. Drift current is proportional to the carrier velocity and carrier concentration :. Total current J p,drift = Q/t

julius
Download Presentation

Lecture 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 3 OUTLINE • Semiconductor Basics (cont’d) • Carrier drift and diffusion • PN Junction Diodes • Electrostatics • Capacitance Reading: Chapter 2.1-2.2

  2. Recap: Drift Current • Drift current is proportional to the carrier velocity and carrier concentration: Total current Jp,drift= Q/t Q= total charge contained in the volume shown to the right t= time taken by Q to cross the volume Q=qp(in cm3)X Volume=qpAL=qpAvht  Hole current per unit area (i.e. current density) Jp,drift = qpvh

  3. Recap: Conductivity and Resistivity • In a semiconductor, both electrons and holes conduct current: • The conductivity of a semiconductor is • Unit: mho/cm • The resistivity of a semiconductor is • Unit: ohm-cm

  4. V I _ + W t homogeneously doped sample L Resistance (Unit: ohms) where r is the resistivity Electrical Resistance

  5. Resistivity Example

  6. A Second Mechanism of Current Flow is Diffusion

  7. Carrier Diffusion • Due to thermally induced random motion, mobile particles tend to move from a region of high concentration to a region of low concentration. • Analogy: ink droplet in water

  8. Carrier Diffusion • Current flow due to mobile charge diffusion is proportional to the carrier concentration gradient. • The proportionality constant is the diffusion constant. Notation: Dp hole diffusion constant (cm2/s) Dn electron diffusion constant (cm2/s)

  9. Diffusion Examples • Non-linear concentration profile  varying diffusion current • Linear concentration profile •  constant diffusion current

  10. Diffusion Current • Diffusion current within a semiconductor consists of hole and electron components: • The total current flowing in a semiconductor is the sum of drift current and diffusion current:

  11. The Einstein Relation • The characteristic constants for drift and diffusion are related: • Note that at room temperature (300K) • This is often referred to as the “thermal voltage”.

  12. The PN Junction Diode • When a P-type semiconductor region and an N-type semiconductor region are in contact, a PN junction diode is formed. VD – + ID

  13. Diode Operating Regions • In order to understand the operation of a diode, it is necessary to study its behavior in three operation regions: equilibrium, reverse bias, and forward bias. VD = 0 VD < 0 VD > 0

  14. Carrier Diffusion across the Junction • Because of the differences in hole and electron concentrations on each side of the junction, carriers diffuse across the junction: Notation: nn electron concentration on N-type side (cm-3) pn hole concentration on N-type side (cm-3) pp hole concentration on P-type side (cm-3) np electron concentration on P-type side (cm-3)

  15. Depletion Region • As conduction electrons and holes diffuse across the junction, they leave behind ionized dopants. Thus, a region that is depleted of mobile carriers is formed. • The charge density in the depletion region is not zero. • The carriers which diffuse across the junction recombine with majority carriers, i.e. they are annihilated. quasi-neutral region quasi-neutral region width=Wdep

  16. Some Important Relations Energy=-qV

  17. The Depletion Approximation Because charge density ≠ 0 in the depletion region, a large E-field exists in this region: In the depletion region on the N side: r(x) In the depletion region on the P side: qND a -b x -qNA

  18. Carrier Drift across the Junction

  19. PN Junction in Equilibrium • In equilibrium, the drift and diffusion components of current are balanced; therefore the net current flowing across the junction is zero.

  20. Built-in Potential, V0 • Because there is a large electric field in the depletion region, there is a significant potential drop across this region: (Unit: Volts)

  21. Built-In Potential Example • Estimate the built-in potential for PN junction below. • Note that N P NA = 1015 cm-3 ND = 1018 cm-3

  22. PN Junction under Forward Bias • A forward bias decreases the potential drop across the junction. As a result, the magnitude of the electric field decreases and the width of the depletion region narrows. r(x) qND a -b x -qNA ID V(x) V0 -b a x 0

More Related