1 / 12

Project 2C(ii) Implementation of OFDM on AWGN Channel

Project 2C(ii) Implementation of OFDM on AWGN Channel. Karira Vishal D Karunakar H V Prabeedh Kumar Ravi Kiran Sreenivas Reddy. Project Architecture. Tasks Assigned. Prabeedh kumar and Sreenivas Reddy Audio Input file to Data Bits

kaden
Download Presentation

Project 2C(ii) Implementation of OFDM on AWGN Channel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Project 2C(ii) Implementation of OFDM on AWGN Channel Karira Vishal D Karunakar H V Prabeedh Kumar Ravi Kiran Sreenivas Reddy

  2. Project Architecture

  3. Tasks Assigned • Prabeedhkumar and Sreenivas Reddy • Audio Input file to Data Bits • Data Bits to Symbol Mapping & Symbol to Data Bits Mapping • Karunakar and Ravi Kiran • Implementation of FFT and IFFT • KariraVishal • Add and Remove Cyclic Prefix • AWGN Channel Implementation

  4. Delivered • OFDM matlab code for Single User. • C code for Bit to symbol and Symbol to Bit mapping. • C code for FFT and IFFT on Cell SDK Simulator. • C code for AWGN Channel on Cell SDK simulator. Problems Faced • Integrating the Audio file in Cell SDK Simulator. Future Tasks • Handling the multi user inputs. • Implementation of OFDMA on an AWGN Channel

  5. Conversion of wave file to bits • I have taken .wav file as input. • After that converted that wav file to text file which contains binary data

  6. Wave file format:

  7. Conversion of bits to symbols • I have sent that binary into channels • I modulated that data by using BPSK(Binary Phase Shift Keying)

  8. FFT & IFFT Block Implementation • IFFT and FFT block is implemented using radix-2 algorithm,using Cooley tukey algorithm. • Dividing the data in equal proportion and loading it into all 8 SPU using the above algorithm. • Reference: SDK for Multicore Acceleration ,Programming Tutorial. • Task of PPU: • Intializing the context data for Thread creation. • Load data for each SPU. • Get back the result after the calculation.

  9. FFT & IFFT Block Implementation(contd..) • Task of SPU • Getting the data from PPU. • Initate DMA to/from 32 bit Effective Address. • Performing the calculation for each SPE loaded data. • Perform write operation to and initiate DMA.

  10. Add and Remove Cyclic Prefix Cyclic Prefix : A copy of the last part of OFDM signal is attached to the front of itself. • In the Transmitter side, we have added 10% of the total number of bits and in the Receiver side, we have removed them. • This bits helps us to combat against ISI almost completely. • But it also leads to reduction in the Bandwidth Efficiency.

  11. AWGN channel • AWGN (Additive White Gaussian Noise) channel adds noise to the transmitted bits in order to present a real time effect of noise. • Y = X + N where Y = Received Sequence X = Transmitted Sequence N = Noise

  12. References • Cell BE Architecture and its First Implementation: http://www.ibm.com/developerworks/power/library/pa-cellperf/ • Cell BE Example Sites: http://www.ibm.com/developerworks/library/pa-sdkexamples/index.html • Cell BE Resource Center: http://www.ibm.com/developerworks/power/cell/?S_TACT=105AGX16&S_CMP=HP • Make file help: http://www.cat.pdx.edu/documents/make.html • Posix Thread: http://www.ibm.com/developerworks/linux/library/l-posix1.html

More Related