1 / 26

Motor Oil & Lube, Oil, Filter (LOF)

Motor Oil & Lube, Oil, Filter (LOF). Mr. Lombardi. Why Change Motor Oil?. Remove Suspended Contaminants Replenish Additives. Motor Oil . Spark Ignition Engines SA through SM

Download Presentation

Motor Oil & Lube, Oil, Filter (LOF)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Motor Oil & Lube, Oil, Filter (LOF) Mr. Lombardi

  2. Why Change Motor Oil? • Remove Suspended Contaminants • Replenish Additives

  3. Motor Oil • Spark Ignition Engines • SA through SM • SM: For all automotive engines currently in use. Introduced November 30, 2004, SM oils are designed to provide improved oxidation resistance, improved deposit protection, better wear protection, and better low-temperature performance over the life of the oil. • Compression Ignition Engines • CA through CI-4 • CI-4: Introduced in 2002. For high-speed, four-stroke engines designed to meet 2004 exhaust emission standards implemented in 2002.

  4. API Certification Mark • An oil displaying this mark meets the current engine protection standard and fuel economy requirements

  5. API “Donut” (Gas) • 1 - Gasoline engine oil categories • 2 – Viscosity Grade • 3 – Energy Conserving 1 2 3

  6. API “Donut” (Diesel) • 1 - Diesel engine oil categories • 2 – Viscosity Grade • 3 – NOT Energy Conserving 1 2 3

  7. API “Donut” (combo) • 1 - Gasoline engine oil categories • 2 – Diesel engine oil categories • 3 - Viscosity Grade • 4 – Energy Conserving 1 2 3 4

  8. Oil Viscosity • Multi-grade oils such as SAE 5W-30 and 10W-30 are the most widely used. • They are thin enough to flow at low temperatures and thick enough to perform satisfactorily at high temperatures. • For use under all but extremely hot or cold conditions

  9. Oil Viscosity

  10. Conventional Vs. Synthetic • Conventional motor oils are derived from petroleum • Cheap • Many contaminants

  11. Conventional Vs. Synthetic • Synthetic oils are replicas manufactured from chemicals in a laboratory • Have a pure base • Increase drain intervals • 2-5 X

  12. Oil Filter • Used to strain the engine oil thus removing abrasive particles. • Spin-On - can-like container • Cartridge - look like small air filters which fit into a canister.

  13. Lube, Oil, and Filter • Remove Filter • Using an oil filter wrench, turn the filter counterclockwise until it's free. • Be careful with it, it's still full of old oil.

  14. Lube, Oil, and Filter • Prepare Filter • Clean filter mounting surface • Lubricate the rubber gasket on the end of the filter with some new oil. • Prime filter (if feasible)

  15. Lube, Oil, and Filter • Install Filter • You don't need a wrench to install the new oil filter • 3/4 to 1 Full turn after the gasket touches the housing

  16. Lube, Oil, and Filter • Drain Oil • Remove plug • Be careful of HOT oil

  17. Lube, Oil, and Filter • Lube Chassis and Suspension • Ball Joints • Tie Rod Ends • Drive-train • See Pic Next

  18. Lube Chassis

  19. Lube, Oil, and Filter • Check Differential Fluids (if equipped) • Rear Axle • Transfer Case • Front Axle • See Pic Next

  20. Differentials

  21. Lube, Oil, and Filter • Check Tire Pressure • Fill to Tire Specs

  22. Lube, Oil, and Filter • Install drain plug to manufactures torque specs

  23. Lube, Oil, and Filter • Refill Motor Oil • Check ShopKey for quantity and Viscosity • Check Under Hood fluids • P/S • Brake • Coolant

  24. Lube, Oil, and Filter • Run Engine • Check for oil pressure • Check for leaks • Check ATF

  25. Lube, Oil, and Filter • Shut off Engine • Lube hood and door hinges • Check oil level • Top off as necessary

  26. The End

More Related