1 / 18

NARAGHI HALL 3 rd FLOOR VENTILATION MANAGEMENT IMPROVEMENT

NARAGHI HALL 3 rd FLOOR VENTILATION MANAGEMENT IMPROVEMENT BEST PRACTICE AWARD HVAC DESIGN/RETROFIT 2014 CALIFORNIA HIGHER EDUCATION SUSTAINABILITY CONFERENCE SAN DIEGO STATE UNIVERSITY. Geng Liu Energy Manager, CSU Stanislaus Brady Nations Regional Manager, Aircuity.

keely
Download Presentation

NARAGHI HALL 3 rd FLOOR VENTILATION MANAGEMENT IMPROVEMENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NARAGHI HALL 3rd FLOOR VENTILATION MANAGEMENT IMPROVEMENT BEST PRACTICE AWARD HVAC DESIGN/RETROFIT 2014 CALIFORNIA HIGHER EDUCATION SUSTAINABILITY CONFERENCE SAN DIEGO STATE UNIVERSITY • Geng Liu • Energy Manager, CSU Stanislaus • Brady Nations • Regional Manager, Aircuity

  2. Naraghi Hall of Science, 3rd floor lab spaces • Occupied 2007 • Third floor included special lab spaces • Designed for constant 10 ACH, 24/7

  3. Aircuity retrofit project objectives • Implement demand control ventilation • 13 lab areas • Implement new hood minimums based on ANSI Z9.5 • Minimum flow when hood closed • Cooling & Heating prevented reaching full Z9.5 min • 100 FPM Face velocity maintained in all cases • Convert constant volume EF w/ bypass dampers to VFD

  4. Bringing projects to reality • Identify Energy Saving Opportunities • Perform Feasibility Study • Project Fund Availability • Management successfully implements energy saving projects, and savings are put to work on additional future energy projects

  5. Results • Reduced Average airflow from 22,100 to13,900 CFM • EF speed reduction from Constant 60 Hz to Avg. ~40 Hz • Energy • 492,000 kWh • 14,213 Therms • All From ~ 16,000 Sq. Ft.

  6. Results: Additional benefits of Project • Reduced Noise Level-Indoor • Reduced Noise Level-Outdoor • Significantly reduced fire damper malfunctions & resulting pressure problems • Widened unoccupied temperature deadband

  7. Project Economics

  8. Understanding DCV Traditional approach: 10 ACH 24/7 Just in case there’s something there.

  9. Does this room need 10 ACH?

  10. Principle of DCV • Continuously measure for airborne contaminants • When present: VENTILATE at design levels • When not present: Use energy effective level

  11. Example of contaminant measurement

  12. Lab contaminant event

  13. The Aircuity System • Continuously monitors for airborne contaminants • TVOCs • Airborne Particulate • CO2 • CO • When presents “requests” additional ventilation • Always active • Not an override

  14. Typical Lab Design showing OptiNet OptiNet Sensor Suite Ventilation Controls General Exhaust Hood exhaust Supply Air OptiNet Sampling Point Fume Hood

  15. Sensor Suite (SST) • Houses the critical instruments • Located in an equipment room • All service work is done here.

  16. Questions?

  17. Thank you

More Related