1 / 15

ChemE 260 Foundation of Thermodynamics

ChemE 260 Foundation of Thermodynamics. Dr. William Baratuci Senior Lecturer Chemical Engineering Department University of Washington TCD 1: All CB 1: ALL. March 29, 2005. Classical Thermodynamics. Large Groups of Molecules – Continuum Scale The Laws of Thermodynamics

kevyn
Download Presentation

ChemE 260 Foundation of Thermodynamics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ChemE 260 Foundation of Thermodynamics Dr. William Baratuci Senior Lecturer Chemical Engineering Department University of Washington TCD 1: AllCB 1: ALL March 29, 2005

  2. Classical Thermodynamics • Large Groups of Molecules – Continuum Scale • The Laws of Thermodynamics • 1st Law: Energy can neither be created nor destroyed. It can only change form. • 2nd Law: Energy in the form of heat only flows spontaneously from regions of higher temperature to regions of lower temperature. • Forms of Energy • Gravitational Potential : • Kinetic : • Internal: • Heat • Work Baratuci ChemE 260 March 29, 2005

  3. Dimensions & Units • Dimensions: Mass, Length, Time • Units: m, ft, kg, lbm, J, Btu • Force • IS a fundamental unit in the AE System • Is NOT a fundamental unit in the SI System • Newton’s 2nd Law of Motion: • SI: • AE: • Conversion Factors • Online: “The Foot Rule” website • http://www.FootRule.com Baratuci ChemE 260 March 29, 2005

  4. Terminology or Nomenclature • System: The material or volume that we are studying • Systems have boundaries • Closed Systems: Mass does not cross the boundary • Open Systems: Mass does cross the boundary • Properties • Intensive vs. Extensive Properties • Extensive properties depend on the size of the system, intensive properties do not. • Molar Properties: per mole. Molar volume: • Specific Properties: per kg or per lbm. Specific volume: • States • The condition of a piece of matter or system as determined by its intensive properties. • If ANY intensive property is different, then the system is in a different state. Baratuci ChemE 260 March 29, 2005

  5. More Nomenclature • Process • A change in the state of a system • Process Path • The series of states that a system moves through on its way from the initial state to the final state. • Special Types of Processes • Isobaric – constant pressure • Isothermal - constant temperature • Isochoric - constant volume • Cycles • Special process paths in which the initial state is the same as the final state • Thermodynamic cycles are a key topic in this course Baratuci ChemE 260 March 29, 2005

  6. Equilibrium • A system is in equilibrium when no unbalanced potentials or driving forces exist within the system boundary. • Thermal: no temperature driving forces • Chemical: no chemical driving forces • Phase: no mass transfer driving forces • Mechanical: no unbalanced mechanical forces • Quasi-Equilibrium Processes • A process during which the system only deviates from equilibrium by an infinitessimal amount. • Every state along the process path is very nearly an equilibrium state. Baratuci ChemE 260 March 29, 2005

  7. Pressure, Volume & Temperature • Volume: • SI: L, m3, mL=cm3 • AE: ft3 • Pressure: acts in all directions  to all surfaces • SI: Pa, kPa, MPa, bar, atm • AE: psia • Absolute, Gage and Vacuum Pressures Baratuci ChemE 260 March 29, 2005

  8. Manometers • Barometer Eqn: • Manometer Eqn: • DifferentialManometer Eqn: Baratuci ChemE 260 March 29, 2005

  9. Temperature • Thermometers and Thermocouples • Temperature conversions are straightforward • T (oC) = T(K) and T (oF) = T(oR) • Ideal Gas Thermometry • Must be calibrated • Tedious, but extremely accurate • IG T-scale is identical to the Kelvin Scale ! Baratuci ChemE 260 March 29, 2005

  10. Next Class • Problem Solving Session • Ch 1 • Homework #1, due Friday 4/1 ! Baratuci ChemE 260 March 29, 2005

  11. Example #1 • Force Required to Accelerate a Rocket • Calculate the force necesssary to accelerate a 20,000 lbm rocket vertically upward at a rate of 100 ft/s2. • Ans.: Ftotal = 82,200 lbf Baratuci ChemE 260 March 29, 2005

  12. Example #2 • Relationships between Different Types of Pressures • Complete the following table if Patm = 100 kPa and Hg = 13.6 H2O . Baratuci ChemE 260 March 29, 2005

  13. Example #2 - Answers • Relationships between Different Types of Pressures • Complete the following table if Patm = 100 kPa and Hg = 13.6 H2O . Baratuci ChemE 260 March 29, 2005

  14. Example #3 • A horizontal 2 m diameter man-hole is located in the bottom of a water tank as shown here. Determine the extra upward force, F, that a man or machine must exert on the man-hole cover to just barely lift it. • Ans.: F = 154 kN Baratuci ChemE 260 March 29, 2005

  15. Example #4 • Gravity is given as a function of altitude by g = 9.81 - 3.32 x 10-6 h (m/s2), where h is the altitude above sea level. An airplane is traveling at 900 km/h at an elevation of 10 km. If its weight at sea level is 40 kN, determine: • Its kinetic energy • Its potential energy relative to sea level • Ans.: Ekin = 127 MJ • Ans.: Ekin = 399 MJ Baratuci ChemE 260 March 29, 2005

More Related