1 / 10

Curves in Perspectives

Department of Technological Education. Curves in Perspectives. The drawing shows a corner of a garden with a garden shed in position. Draw the remainder of the wall showing the curved arch in the appropriate position. Department of Technological Education. Finding Height Line and Heights.

kim-park
Download Presentation

Curves in Perspectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Department of Technological Education Curves in Perspectives • The drawing shows a corner of a garden with a garden shed in position. • Draw the remainder of the wall showing the curved arch in the appropriate position.

  2. Department of Technological Education Finding Height Line and Heights • Start by dividing the curve into 30o parts on the Elevation and also on the Plan. Find the height line for the wall. Transfer the heights from the arch on the Elevation onto the newly found height line.

  3. Department of Technological Education Finding First Point on Curve • Start by projecting a point from the SP, through one of the outside points of the curve, up to the ground line. Use the points on the visible side of the wall at this stage. • Project this line vertically up. • Project a line from VP2 through the appropriate height point towards the vertical line and add a small dot where the two lines cross.

  4. Department of Technological Education Finding Second Point on Curve • Proceed in the same way through the next point of the curve.

  5. Department of Technological Education Finding Other Points on Curve • Continue this process until all the points on the curve have been found for the visible side of the wall.

  6. Department of Technological Education Drawing Front Arch • Combine each of the points using a smooth curve. • Complete the bottom part of the archway.

  7. Department of Technological Education Constructing Back Arch • Project lines from each of the points of the front arch to VP1. • Be selective when doing this. • Only the part of the wall that will be visible needs to be done. Using the front, outside edge of the wall, project back to find the thickness of the arch at ground level. Using the same techniques as before project through each of the required arch points on the plan to find their positions on the perspective view.

  8. Department of Technological Education Completing Arch • Darken in the final part of the archway to complete the drawing.

  9. Department of Technological Education The Final Drawing • The final drawing should look like this.

  10. PowerPoint Presentation produced by John McRae, Nairn Academy 2003

More Related