1 / 21

Neuroprosthetics

Neuroprosthetics. Week 5 Stimulating and recording of nerves and neurons. Realising an Action Potential. Depolarization (synaptic transmission or external stimuli) causes ion channels to open Response of Na channels causes increase in outward current – depolarizes membrane further

kolton
Download Presentation

Neuroprosthetics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Neuroprosthetics Week 5 Stimulating and recording of nerves and neurons

  2. Realising an Action Potential • Depolarization (synaptic transmission or external stimuli) causes ion channels to open • Response of Na channels causes increase in outward current – depolarizes membrane further • Once opened, ion channels stay open for a while • Action potential achieved when depolarization exceeds a threshold – then outward current exceeds inward current • Depolarization is reversed by closing of Na channels and opening of K channels • Membrane potential is restored to resting value

  3. Electrical activation of ion channels • Applying a negative current via a stimulating electrode depolarizes the membrane. • Natural response is then evoked. • Electrical stimulus can lead to action potential. • Stimulating electrode serves as a cathode. • Return electrode required to complete the current loop.

  4. Intracellular Electrodes • Technique used to inject current inside the cell is the patch clamp. • Glass pipette electrodes are used to penetrate the cell membrane. • A high impedance seal is thus formed between the membrane and pipette. • Very efficient method but difficult/impossible to form an implantable device!

  5. Functional Magnetic Resonance Imaging (fMRI) • Used to detect brain activity in response to a specific stimulus. • No direct electrical interface - noninvasive. • Scans can be recorded. • Resolution typically more than 1mm. • Difficult to perform – expensive. • Useful in assisting positioning of electrodes.

  6. Charge balanced stimulation • For a single stimulation waveform the total net charge must be zero. • Either supply equal cathodic and anodic currents or better to use a blocking capacitor which slowly discharges. • But capacitor size effects pulse duration. • If charge is not balanced, bubbling can occur (oxygen + hydrogen produced).

  7. Biphasic response

  8. Example – Cochlear implants • Use charge balanced, biphasic stimulation pulses to activate auditory nerve. • When a 200Hz signal is present, short pulses of 0.1msec at 200 Hz used to stimulate. • We will consider this more in lecture 7/8

  9. Stimulating Interface • Electrodes form the interface between stimulus circuit and biological cells. • Material must be high conductivity - must deliver current at high charge densities without corroding or dissolving. • Charge injection capacity, electrochemical stability and mechanical strength are important. • Need to be chemically inert. • Small area electrodes for better resolution. • Platinum, Iridium, Gold are all good.

  10. Extracellular recording • Stimulation is the basis for restoration of sensory and motor function. • Recording/monitoring is also essential for a prosthesis. • Usually extensive physiological recording research must be done to map an area into which a stimulation device will be implanted. • Recordings are also often used to validate efficacy and optimize design of implants.

  11. Closed-Loop prostheses • Monitoring is an essential part of any closed-loop prosthesis. • Example – for spinal cord injuries – biological control signals can be recorded to drive implanted stimulating electrodes. • John Chapin’s work (rats) involved signals from the motor cortex driving a robot arm – reward/punishment in a maze!!

  12. Cellular level nervous system • When a neuron receives stimuli from other cells its membrane depolarizes and causes ionic currents to flow. • The action potential (voltage drop) associated with this current can be measured if a suitable electrode is located near enough. • An action potential is typically 50 to 500 microvolts with a frequency content from 100Hz to 10 KHz.

  13. Pipette Electrodes • Electrode must approach the active neuron without damaging it or other cells acting with it. • Electrode needs to be as small and noninvasive as possible. • Glass micropipette – heating and pulling 1mm diameter glass capilary. • Tip tapered and bevelled to 1 microm. • Filled with electrolyte solution for conduction. • Forms a low pass filter – good for up to 1 KHz only.

  14. Microelectrodes • Preferred method for detecting action potentials is with a metal microelectrode. • Use small diameter metal wire sharpened to a (less than) 1 microm tip • Examples: Tungsten, stainless steel, platinum • But single electrodes do not give information on cell networks.

  15. Multichannel recordings • Important to observe the activity and interaction of many neurons simultaneously. • Determine relationships between cells. • Neurons can be separated by spatial distribution as well as waveform/time. • Dealt with in Lecture 2 by Adam.

  16. Multichannel methods • Photoengraved microelectrodes • Microelectrode arrays • SOI wafer fabrication • Polymide electrodes • Michigan probe • Three-dimensional array • Acute probes

  17. Example • Microelectrode array • High density of penetrating shafts • Each shaft is 0.5 to 1.5 mm long • These project down from a glass/silicon composite base • Silicon shafts are isolated from each other with a glass frit. • The 50 microm tip of each shaft is coated with platinum to form the electrode site. • The shafts are spaced on 400 microm centres.

  18. Design Considerations • Shank length – depends on depth of target and strength/stiffness. • Shank width – minimize for noninvasiveness but maximize for strength • Substrate thickness – insertion in tough tissue. Buckling force is important. Poss high velocity. • Site spacing – could show correlated and uncorrelated activity. • Site area – smaller site/higher impedance, causing attenuation and noise. But larger site is less selective.

  19. Future directions • Solid-state devices – batch fabrication, reproducible characteristics, small size + on-chip processing. • Bioactive coatings – improved interface + enhanced recording stability. Seed coating with neurotrophins to assist behaviour. • Reduced output leads – reduces motion, migration and adverse tissue response. Wireless operation + on-chip design.

More Related