1 / 33

SolidWorks Session 3

SolidWorks Session 3. Ferdowsi University of Mashhad Dr. Behnam Moetakef Imani. Extrude. Types of Extrude. Extrude Property Manager : From. Extrude Property Manager : Direction. Extrude Property Manager : Direction. Extrude Property Manager : Direction.

kula
Download Presentation

SolidWorks Session 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SolidWorks Session 3 Ferdowsi University of Mashhad Dr. Behnam Moetakef Imani

  2. Extrude

  3. Types of Extrude

  4. Extrude Property Manager : From

  5. Extrude Property Manager : Direction

  6. Extrude Property Manager : Direction

  7. Extrude Property Manager : Direction

  8. Extrude Property Manager : Direction

  9. Extrude Property Manager : Direction

  10. Extrude Property Manager : Direction of Extrusion

  11. Extrude Property Manager : Draft

  12. Mouse gestures • Mouse gestures are an interface method that you can customize to do anything a SolidWorkstoolbar button can do, but by default, it controls view orientation. • Click+drag the right mouse button (RMB) to access the commands on the donut

  13. Extrude Property Manager : Thin Features

  14. Extrude Property Manager : Selected Contours

  15. Revolve

  16. Curves

  17. Projected Sketched Curves

  18. Sketch On Faces • The sketch is projectednormal (perpendicular) to the sketch plane. • The sketch can be an open or closed loop, • but it may not be multipleopen or closed loops, nor can it be self-intersecting.

  19. Projected Sketched Curves : onto face

  20. Projected Sketched Curves : onto sketch

  21. Composite Curve

  22. Helix & Spiral

  23. Split Line

  24. Curves Through Reference Points

  25. Curves Through XYZ Points

  26. Reference Geometry

  27. Creating Planes

  28. Creating Axis

  29. Create Coordinate System

  30. تمرین

  31. Sketch types • sketch types, including closed loop and open loop. • Closed loop sketches make solid features by default, but you can also use them to make thin features. • Open loop sketches make thin features by default, and you cannot use them to make solid features. • A nested loop is one closed loop inside another, like concentric circles. • Self-intersecting sketches can be any type of sketch where the geometry crosses itself. • SolidWorks also identifies sketches where three or more sketch elements intersect at a point by issuing an error if you try to use the sketch in a feature.

  32. Sketch contours enable to select enclosed areas where the sketch entities themselves actually cross • otherwise violate the usual sketch rules. • One of these conditions is the self-intersecting contour

  33. End of Session Three

More Related