1 / 17

Maintenance and Service Aids

Maintenance and Service Aids. A total solution for maintenance, repair and overhaul. INTRODUCTION. A range of maintenance and service aid products are supplied by Electrolube to service OEMs and subcontractor use.

lacey
Download Presentation

Maintenance and Service Aids

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Maintenance and Service Aids A total solution for maintenance, repair and overhaul

  2. INTRODUCTION • A range of maintenance and service aid products are supplied by Electrolube to service OEMs and subcontractor use. • Whether it be general surface cleaning, equipment maintenance products or paints, Electrolube have a range of options in convenient packaging: • Syringes • Tubes • Pump Sprays • Aerosols • Wipes • Pens

  3. INTRODUCTION • The maintenance range is split into key sections: • Airdusters, Freezers and Foam Cleaners • Lubricants and Greases • General Maintenance • Cleaners and Paints • Prototyping and Accessories • Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available.

  4. Section 1 • Airdusters, Freezers and Foam Cleaners

  5. AIRDUSTERS, FREEZERS AND FOAM CLEANERS • Airdusters - For the removal of dust and dirt from hard to reach places, photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying. • Freezer Sprays - For the identification of faulty components by rapidly cooling components to well below -50°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components. • Foam Cleaners – Non-flammable products for general surface cleaning. Safe for use on plastic and providing protection against static build up, products are available in different strengths depending on the type or level of cleaning required.

  6. AIRDUSTERS, FREEZERS AND FOAM CLEANERS • PRODUCTS: • AFC – FOAM CLEANER • CTC – HEAVY DUTY CLEANER • EAD/EADI – STANDARD AIRDUSTES • EADP/EADPI – ULTRA HIGH POWER • GDP – HIGH POWER AIRDUSTER • FRE – FREEZER SPRAY • MCF – MINIMAL CHARGING FREEZER

  7. AIRDUSTERS, FREEZERS AND FOAM CLEANERS • There are two variations of airdusters – upright and invertible: • Standard airdusters can only be used in the upright position, tilting at • an angle no greater than 60˚ from vertical. • Invertible airdusters are designed to be used at any angle. If you invert • a standard airduster then it will expel liquid. • All Electrolubeairdusters and freezer sprays use non-flammable propellants. • The standard versions utilise HFC-134a however we have now released two environmentally friendly alternatives utilising a new propellant technology.

  8. EADH AND FREH The change from HFC-134a Worldwide could save more than 14 million metric tons per year of CO2 equivalent emissions, comparable to eliminating carbon dioxide emissions from more than 2.5 million cars every year. In terms of air dusters and refrigerant sprays alone, replacing one 200ml standard can of duster containing HFC-134a with the new EADH results in a remarkable reduction of CO2 emissions of 347.5Kg, the equivalent of flying 1632 air miles (3021 Km).

  9. Section 2 • Lubricants and Greases

  10. LUBRICANTS AND GREASES • A range of mechanical lubricants and mould releases are available, as well as lubricant products from the standard range in syringe form for localised application. • ACL – Adhesive Chain Lubricant • AGC – Copper Anti-Seize Fluid • CMO – Clear Mechanical Oil • DDF – Leak Detector Spray • DAS – Silicone Mould Release • DGT – Penetrating Fluid • DFL – Dry Film Lubricant • MPG – Multi-Purpose Grease • EPE – Permaguard • HTG – High Temperature Grease • OSL – Silicone Oil

  11. Section 3 • Cleaners and Paints

  12. CLEANERS AND PAINTS • A range of high gloss paints, galvanising sprays, high temperature paints and paint strippers are available: • PWB/PVB/PBB/PJB/PRB/PNB – HIGH GLOSS PAINTS • PNM/PAM – HIGH TEMPERATURE PAINTS • PGB/PGM – GALVANISING PAINTS • DTP/GRG/GRS – PAINT STRIPPERS/GRAFITTI REMOVERS

  13. Section 4 • General Maintenance

  14. GENERAL MAINTENANCE • The general maintenance range includes an array of products for various applications, including surface mount: • ASA – ANTI-STATIC SPRAY • BLV/R – BLOC’LUBE • HDC – CUTTING FLUID • CYL – CYANOLUBE • DB1003/1005 – DESOLDERING BRAID • HDC – CUTTING FLUID • LRM – LABEL REMOVER • NSCP – NICKEL SCREENING COMPOUND PLUS • MPU – POLYURETHANE FOAM • PBS – ANTI-SPATTER SPRAY • RRR – RUBBER ROLLER RESTORER • SCP – SILVER CONDUCTIVE PAINT • SMA – SURFACE MOUNT • ADHESIVE • SMF – SURFACE MOUNT • REWORK FLUX

  15. Section 5 • Prototyping and Accessories

  16. PROTOTYPING AND ACCESSORIES • The final section includes a number of materials suitable for prototyping; often utilised by small end-users or in development stages within small companies. • PRP – POSITIVE PHOTORESIST • PDN – PHOTORESIST DEVELOPER • CPL – CLEAR PROTECTIVE LACQUER • DEI – DEMINERALISED WATER • FCC – FERRIC CHLORIDE • SGL – SILICA GEL • TSB – TRIGGER SPRAY BOTTLE • APB – AIR POWERED BOTTLE

  17. Thank you For further information please visit www.electrolube.com

More Related