1 / 6

Paired t Test

Paired t Test. t value is calculated in a slightly different form difference between each of the paired measurements on each sample is computed. Average difference D is calculated and individual deviations of each from D are used to compute a standard deviation, s d

lam
Download Presentation

Paired t Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Paired t Test t value is calculated in a slightly different form difference between each of the paired measurements on each sample is computed

  2. Average difference D is calculated and individual deviations of each from D are used to compute a standard deviation, sd • t value is calculated from :

  3. Example You are developing a new analytical method for the determination of blood urea nitrogen (BUN). You want to determine whether you method differs significantly from a standard one for analyzing a range of sample concentrations expected to be found in the routine laboratory. It has been ascertained that the two methods have comparable precisions. Following are two sets of results for a number of individual samples.

  4. Solution :

  5. 95% confidence level is considered significant • 99% level is highly significant • Smaller the calculated t value, more confident that there is no significant difference between the two method

  6. Too low confidence level (e.g. 80%), likely to conclude erroneously that there is a significant difference between two methods (type I error) • On the other hand, too high confidence level will require too large a difference to detect (type II error) • If a calculated t value is near tabular value at the 95% confidence level, more tests should be run to ascertain definitely whether the two methods are significantly different

More Related