1 / 19

Motion Sensors Displacement, velocity and acceleration

Motion Sensors Displacement, velocity and acceleration. Dimensional measurement. Micrometers. Vernier caliper. One complete revolution = 0.5 mm (usually) With 50 divisions, each division movement corresponds to 0.01 mm

lan
Download Presentation

Motion Sensors Displacement, velocity and acceleration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Motion Sensors Displacement, velocity and acceleration

  2. Dimensional measurement Micrometers Vernier caliper • One complete revolution = 0.5 mm (usually) • With 50 divisions, each division movement corresponds to 0.01 mm • If user can control every one-fifth of a division, a resolution of 0.002 mm is possible

  3. Height & depth measurement Gauge blocks Dial gauge: typical resolution 0.01 mm Height & depth gauges

  4. Resistive potentiometer Rotary potentiometer (a) circular; (b) helical Linear potentiometer Types: wire-wound, carbon-film and plastic-film (according to resistance element)

  5. Linear Variable Differential Transformer (LVDT) • Inductive displacement sensor. • Transformer with 1 primary & 2 secondary coils, connected in series opposition • Output voltage (difference between induced voltages)is proportional to core displacement • Zero reading when core is centered Primary Secondary Rotary differential transformer

  6. Eddy current sensor • Inductive displacement sensor. • Coil is excited at high frequency (typically 1 MHz) • This induces eddy current in the target • Eddy current alters the inductance of the probe coil • This change can be translated into a voltage proportional to the air gap

  7. Piezoelectric transducers • A piezoelectric material generates charge when deformed • Induced charge leaks away with time • Piezoelectric transducers are not suitable for static or slowly-varying dispalcements

  8. Optical encoders (incremental) • Measure instantaneous angular position of a shaft • Output is in the form of pulses to be counted

  9. Optical encoders (coded-disc) • Output is in the form binary numbers to give absolute measure of shaft position Float encoder

  10. Other rotational motion sensors • Gyroscopes • Tachometers • Mechanical flyball Gyroscope Photoelectric tachometer Mechanical flyball

  11. Vibration Measurement

  12. Energy Harvesting Source: J.K. Ward and S. Behrens, “Adaptive learning algorithms for vibration energy harvesting”, Smart Materials & Structures 17 (2008) 035025 1-9.

  13. Vibration-based Energy Harvesting Source: B.P. Mann and N.D.Sims, “Energy harvesting from the nonlinear oscillations of magentic levitation”, Journal of Sound and Vibration (2008) in press.

More Related