Tips for securing your Wireless network

1. Tips for securing your Wireless network Most of us are familiar about connecting our cell phones, laptop or tablets to wireless networks. Wireless connections are established by creating an internet access point such as modem or router which further sends the signal to the Wi-Fi enabled devices. If you are not aware about how to secure your wireless networks, then you need to gear up and protect it since hackers can find their way to launch malicious attacks on your computer through your wireless network.  Empower your encryption If you are looking for ways to secure your wireless network then enable encryption on your router. This will be the first step that most experts will prefer to do. Information will be scrambled while encrypting which is contained in the messages between the router and the device. Restriction will be imposed on open access from the other user. Wired Equivalent Privacy and Wi–Fi Protected Access are two types of encryption method. It depends upon the user that which method they choose to protect their wireless network.

2. Plenty of flaws have been shown by WEP in the past few years which was established in late 90’s. Since WEP is better than WPA, but most people would likely choose WPA 2 as it would be a better choice for the encryption method because it is more secure then the WEP. Choose the password after you have enabled your encryption. Try to keep the password longer as it will be harder for the hacker to guess.  Keep in mind that the ways of enabling your encryption on the router will vary according to the manufacturer and model so, refer to their website if you face trouble.  Firewall need to be turned ON The best way to stop unwelcome intrusions to your network is to turn on your router’s firewall. Most of the wireless routers come with the firewalls built in, but they have to be turned on. So, it is necessary to check out whether the firewall is actually on or not.  Access the channel using MAC Address MAC addresses have to do nothing with apple products. In a wireless networks, MAC stands for Machine access code which is a unique identification for each device.

3. Filter access option will be provided by most of the routers through which only those device will be able to access the Wi-Fi who have been preapproved by you. Though the MAC address of Windows operating system and MAC OS X varies but it is not difficult to find either. It might be possible for the hackers to clone a MAC address in order to fool router, so filtering the MAC address should be used in tandem with the security measures.  Default name of the network should be changed Service set Identifier is known as the network’s name. List of the name of each network will be provided as you connect to the wireless network. Default name is given to the routers so it is optional to provide your own name or not. The network should not be named after anything personal or a family member.  Change default address Wireless routers come with preset passwords. It will be a easy job for hackers to guess the password of your network as most of the routers come up with the default password from the factory. It will be harder for people to crack down the password if your password contains upper and lower case letters, numbers and symbols. 

4. Avoid Remote Administration Security modifications will be made through wired connection as you disallow remote administration. People will not be able to change the settings of your Wi-Fi, if they are going to access your Wi-Fi. This option is located in your routers administrative settings.  These tips will provide you better understanding of securing of your Wi-Fi security in order to avoid the leakage of your personal information.  Article Resource:http://itsupoortfortworth.jimdo.com/2015/11/17/tips-for-securing-your-wireless-network/