What You Should Know About Your Washer

1. What What You You Should Should Know Know About About Your Your Washer Washer While many people may not think about it, a washer appliance repair is important to have done every so often. Washers are one of the most commonly used appliances in any home, and, as such, they need to be repaired from time to time. Many people do not realize how much their washer helps them with their daily tasks until it breaks down, and they are left without it. Either way, it is important to call Kitchenaid Appliance Repair Professionals in Oyster Bay Cove when you need to keep your washer running smoothly. Why Is Your Kitchenaid Washer Not Filling Up Water? If your Kitchenaid washer isn’t filling up with water, there could be several reasons. Here are five potential causes: Blocked Inlet Screens First, your Kitchenaid washer might not be filling up with water because the inlet screens are blocked. These screens are located where the water hoses attach to the back of the washer; if they’re blocked, water can’t flow through. To clean them, remove the hoses and use a brush to clear any debris from the screens.

2. Faulty Water Inlet Valve Another potential reason for the lack of water flowing into your washer is a faulty water inlet valve. This valve is located behind the control panel and controls water flow into the washer. If it’s not working properly, it could be preventing water from entering the machine. To test it, disconnect the power to the washer and remove the hose that goes to the valve. Check to see if the water flows through. If this is not the case, the valve will have to be replaced. Clogged Drain Pump If water is getting into the washer but not draining out, it could be because the drain pump is clogged. This pump is located under the washer tub and helps remove water from the machine. If it’s not working properly, water will build up in the tub and eventually overflow. To clean the pump, remove it and clear any debris blocking it. Worn Pump Belt Another potential reason for a clogged drain pump is a worn pump belt. This belt helps rotate the pump blades and can become worn over time. If it’s not working properly, water will build up in the tub and eventually overflow. To replace the belt, remove the old one and install a new one. Lid Switch Error If your washer doesn’t fill up with water, it could be because of a lid switch error. This switch is located under the washer lid and prevents the machine from running if the lid is open. If it’s not working properly, the washer will think the lid is open and won’t fill up with water. To fix this, disconnect the power to the washer and remove the lid switch. Clean any debris that’s blocking it, and then reinstall it. If your Kitchenaid washer still isn’t working, it’s time to call a professional for assistance. Looking for more appliance tips and the best wine coolers brands? Check out here for more details.