1 / 13

CENTRIFUGAL PUMP

CENTRIFUGAL PUMP. Module 3.2 Vertical Pump Construction. www.cryostar.com contact@cryostar.com. Main Uses are: Air separation Liquefaction plants. Various applications: Internal compression Crude argon recycling Re-injection Back-up. Labyrinth. Reminders. Impeller diameter.

lawrencia
Download Presentation

CENTRIFUGAL PUMP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CENTRIFUGAL PUMP Module 3.2 Vertical Pump Construction www.cryostar.com contact@cryostar.com

  2. Main Uses are: • Air separation • Liquefaction plants. • Various applications: • Internal compression • Crude argon recycling • Re-injection • Back-up

  3. Labyrinth • Reminders Impeller diameter Material VP 8/145/4L-3,0 C/0 8 stages Speed*100 Impeller tipwidth Vertical

  4. Principles • Vertical pumps divided in Three parts: • Cold End • Warm box or Intermediate piece • Motor Side • Single and Multi stage pumps • Cold box installation with thermal barrier • All seal types available • Cold end with direct coupled motor. • Synchronous speed (50/60Hz) or variable speed

  5. VP construction • Drive shaft with coupling • Shaft seals : • Labyrinth • Mechanical • Gas seal • Dual Gas seal • Total mass supported by mounting flange

  6. Construction: Warm box (Intermediate piece on VP) Outlet of the labyrinth heating coil grease retainer chamber coupling leak detector

  7. Construction: Warm box (cont’d)

  8. Construction: Warm box (cont’d) Heater on motor side

  9. vent inducer diffusor impeller outlet inlet • Construction: Cold end

  10. Construction: Cold end (cont’d)

  11. Construction: Cold end (cont’d)

More Related