1 / 69

Creating DataExpress Procedure

This tutorial guides you through the steps of creating a DataExpress procedure, including terminology, data sources, sorts, selections, calculations, and report output.

lesli
Download Presentation

Creating DataExpress Procedure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Creating DataExpress Procedures TUTORIAL May 2, 2002 This presentation is designed to walk you through the basic steps of creating a DataExpress procedure.

  2. Creating a DataExpress Procedure TERMINOLOGY A byte is a one-character piece of information. It is the smallest unit of information in a database. Data bytes are extracted using DataExpress by writing a computational expression. click to continue A data element is a group of related bytes that identify a unit of information, such as student name. Other examples of data elements are STU-STREET, STU-CITY, STU-ST, and STU-ZIP, which are a few of the data elements in the STU-D data set in the SM database. click to continue A data set consists of related data elements (fields) that define the contents of a record, for example, all the data elements that identify a student's address. An example of a data set is STU-D (Student Detail) in the SM database. click to continue A database is a collection of data organized for rapid processing, searching, and retrieval. A database consists of related data sets. An example of a database is SM (Student Management). click to continue Database Data Set Data Element Data Byte

  3. Creating a DataExpress Procedure BASIC STEPS • Identify the data sources (databases and data sets) you want to access. • Select the desired data fields from the data sets to create a working set. • A working set consists of all fields required for sorting, selecting, computations, and ouput. • Create and define any computational fields. • Define the output file. • Select the data fields in the order they should appear in the report. • Identify the data fields to use for sorting. • Identify the data fields to use for summary functions and control breaks. • Identify the data fields to use for selection criteria. • Specify the linkages between data sets. • Identify the output format (ex: terminal display, report listing) • Run the procedure. • Save the procedure. • click to continue

  4. Creating a Basic DataExpress Procedure DATA SOURCES Before you go into DataExpress, determine which databases, data sets, and data fields you need to produce the report you want. In this case you have determined that the data you need will be extracted from: Database: SM Data sets: CLASS-D, STU-CLASS-D, STU-YRQ-XREF-D, STU-D Data fields:

  5. Creating a Basic DataExpress Procedure SORTS, SELECTIONS, CALCULATIONS, REPORT OUTPUT • The following presentation walks through the screen by screen steps for creating a basic DataExpress procedure. This sample procedure produces a report that depicts the following data: • Classes in the year quarters A123 and A124. • Item numbers in the 1000 number range. • The student cumulative GPA’s are represented showing average, low and high GPA’s by item number and for the entire report output. • A count of students by class and by report is provided. • click to continue

  6. From the DataExpress Main Menu, choose option 3 CREATE a new procedure. Once you create a procedure, you use it to produce (or run) a report. NOTE: Option #1 displays a list of existing DataExpress procedures in a specified catalog. Option #2 runs an existing DataExpress procedure. Option #4 allows modifications to existing DataExpress procedures. Option #8 exits DataExpress. click to continue

  7. From the CREATEa new procedure menu, choose option 1 (Use HP DICTIONARY definitions) to create most of your DataExpress procedures. All fields in FMS, PPMS, SMS, and FAS SAFERS databases are defined in the HP Dictionary. NOTE: Option #2 is used primarily for FAS NEEDnn databases. Option #3 is no longer used. Option #4 is used for accessing MPE, KSAM or self-describing files. Option #7 returns to the Main Menu. click to continue

  8. From the Use HP DICTIONARY definitions menu, choose option 2 (Use HP IMAGE data base definitions) to extract data from the SBCTC-IT application databases (FMS, PPMS, SMS and FAS SAFERS). NOTE: Option #3 is used to extract data contained in files created during job scheduling or batch processing. Not all files listed are permanent files. Some files may be working files for the job process and will contain no data. click to continue

  9. From the Use HP IMAGE data base definitions menu, choose option 2 (Select a specific IMAGE data base). Note:While it is possible to link multiple databases and files, you can select only one database at a time. Others may be added later in the create process. Option #1 displays a list of the available IMAGE databases. Option #3 allows the selection of a single data set. click to continue

  10. At the IMAGE data base name prompt, type the name of the application database to be accessed (SM – based on your preparation before you launched DataExpress). NOTE: Additional databases or files will be added at the ADD MORE FIELDS OR FILES (N/y)? prompt later in the process. click to continue

  11. At the Enter Data Set Selection prompt, type the menu numbers (separated by commas - no spaces) of the datasets to be used in creating the procedure. NOTE: If possible, enter the data set numbers in the order that they are to be linked. This is not REQUIRED, but is helpful when selecting data elements that may appear in multiple files. Linking is also made less confusing. click to continue

  12. Many databases will have multiple pages of listed data sets. To go to the next page without selecting anything on the current page, at the Enter Data Set Selection prompt, simply press Return. Note: When viewing DataExpress screens, read the information above the dotted line. Here you will find information about which menu is being viewed and which page of a multi-page selection menu is being displayed. click to continue

  13. Again, you don’t need any fields on this page so press Return to go to the next screen. click to continue

  14. To select the data fields you want from each data set, type the field menu numbers (separated by commas – no spaces) at the Enter Data Field Selection prompt. From the CLASS-D data set, you want fields 14 (CLASS-ITM-NUM), 23 (COURSE-ID), and 28 (COURSE-TITLE). Note: It is not necessary to select the data fields in any particular order. The fields you select are building the Working Set (fields you want in your report output as well as fields used for sorting, selecting, and computations). click to continue

  15. Note: Read the information above the dotted line. This tells you from which data set you are selecting fields and which page you are on. click to continue At the Enter Data Set Selection prompt, continue selecting the fields to build the Working Set: 4 (INSTR-NAME) and 45 (YRQ).

  16. On page 3 of the CLASS-D data set, press Return (no more fields are needed from this data set). click to continue

  17. Note: Reading the information above the dotted line, notice that DataExpress is now displaying the fields in the second dataset (STU-CLASS-D) in the selection. click to continue At the Enter Data Field Selection prompt, type the menu number of the field to be added to the Working Set – 7 (DROP-DATE).

  18. At the Enter Data Field Selection prompt, type the menu number of the field to be added to the Working Set – 1 (SID). Note: DataExpress is displaying the data sets in the order they were selected from the SM database selection menu. This screen displays the fields in STU-YRQ-XREF-D. click to continue

  19. At the Enter Data Field Selection prompt, type the menu number of the field to be added to the Working Set – 17 (CUM-GPA). Note: DataExpress is now displaying page 1 of 2 of the pages in the STU-D data set. click to continue

  20. At the Enter Data Field Selection prompt, type the menu number of the field to be added to the Working Set – 14 (STU-NAME). Note: Page 2 of 2 of the fields in the STU-D data set are now displayed. click to continue

  21. Once you have finished selecting all the data fields (also called data elements) that you need for your procedure, at the Add More Fields Or Files prompt, press Return to continue building the procedure specifications. Note: The fields listed between the dotted lines, under the Define Output Specifications heading are referred to as the Working Set. A Working Set consists of all fields selected for output, sorting, selecting, and computations. If more fields or files were needed for the Working Set, the response to the Add More Fields Or Files prompt would be Y (yes). click to continue

  22. At the Enter Field Definitions prompt, type Y (yes) to define a date subtype for the DROP-DATE field. Note: All date fields should have date subtypes defined for them. For more information about what date subtypes are and how they function, click here : click to continue

  23. By typing “Y” at the previous prompt, the prompts below are displayed, allowing the date subtype entry. click to continue At the Enter a Field Number prompt, type the menu number that corresponds with the date field to be modified (6 for DROP-DATE). click to continue At the Data Type (J+) prompt, type an ampersand (&). The ampersand is a symbol that prompts DataExpress to allow a date subtype entry. click to continue At the Date Subtype prompt, type the date subtype that represents how data is stored in the field (for example, YYMMDD for 021231, December 31, 2002). Note: The majority of the date-related fields in the SBCTC-IT applications are 6 character YYMMDD formatted fields. When adding date subtypes, you are defining how the data is stored, not how you want it to display. click to continue

  24. Once you have defined all date subtypes for date-related fields, at the Enter Field Number prompt, press Return to continue to the next option. click to continue

  25. At the Add Any Computational Fields prompt, press Return to accept the default of N (no). Note: A Y (yes) reply at this prompt, allows the creation of computed values. Most typically, computational fields are comprised of either arithmetic expressions (ex: one field plus another field), or conditional statements (ex: return a particular value if a certain condition or value is found in the field record). click to continue

  26. At the Include In Output prompt, type the field menu numbers (separated by commas - no spaces) in the order that you want the fields to appear on the report in columnar format. Note: It is not necessary to include all fields from the Working Set in the report output. Often fields are selected for the Working Set to be used as sort fields, selection fields (for filtering specific records), or as fields to be used in computations. Helpful Hint: It is recommended that sort fields are the leftmost fields in the report. This creates a control break where summaries can be obtained. click to continue

  27. At the Sort By prompt, type the menu numbers (separated by commas - no spaces) of the fields that you want the report to be sorted by. In this case, you want the data first sorted by YRQ, then by CLASS-ITM-NUM, and so forth. Note: In this report,by selecting all fields related to the class as sort fields, a blank will appear in each row for those fields until a change in value occurs. This gives a group appearance that is easier to read than listing the repeating values. click to continue

  28. At the Summarize By prompt, type 0 to obtain report totals, followed by 1 to obtain totals for each CLASS-ITM-NUM. Note: Fields specified as SUMMARIZE BY fields must also be SORT fields that produce a control break. A control break is the point at which the value in a sort field changes. At each control break, you can specify a summary function. click to continue

  29. Under Enter Summary Field Selection For, at the report prompt, type 7C, 8A, 8H, 8L to obtain report summaries as follows: Count SIDs, calculate the Average, High, and Low CUM-GPAs. Note: The report prompt relates to the SUMMARIZE BY entry of 0. When prompted for summary field selections, you can enter fields contained in the Working Set followed by operators of C (count), A (average), H (high), L (low), E (end or last value), and * (subtotal a numeric field). click to continue

  30. Under Enter Summary Field Selection For at the CLASS-ITM-NUM prompt, type 7C, 8A, 8H, 8L to obtain summaries by item number for: Count SID’s, calculate the Average, High, and Low CUM-GPA. click to continue

  31. At the Suppress Detail Detail Records press Return to accept the default of N (no). Note: When responding with a Y to this prompt, automatic summarization of numeric fields will occur, giving a summary line report. This will only happen where non-unique values in non-numeric fields appear. To see an example of a report displaying suppressed detail, click here: click to continue

  32. At the Select By prompt, type the menu numbers (separated by commas - no spaces) for the fields that will be used to enter run-time values that will limit or filter the record output of the report. Note: Try to order the Select By fields in the order that they are found in the file linkage. In other words, select by those fields that come from the first data set first. If multiple fields from a single data set are used as selection fields, enter the key fields first. click to continue

  33. At the Are The Specifications Correct prompt, press Return to accept the default of Y (yes). Note: A N (no) reply will return to previous prompts for data re-entry. click to continue

  34. At the File Access And Linkage Order prompt, type the data set numbers (separated by commas - no spaces) in the order they are to be accessed. 1 (CLASS-D), 2 (STU-CLASS-D), 3 (STU-YRQ-XREF-D), 4 (STU-D). Note: When files (data sets) are separated by commas, it is assumed that the link field is in the file immediately to the left of the file number. Above, the linkage reads as follows: file 1 links to file 2, file 2 links to file 3, file 3 links to file 4. For other examples of linking methods, click here: click to continue

  35. At the Is There A Defined Path Between Data Sets prompt, press Return to accept the Y (yes) default. DataExpress will then search for the link between CLASS-D and STU-CLASS-D as noted at the top of the screen. Note: When unsure of whether or not there is a defined path, press return. If there is not a defined path, DataExpress will return a warning message and allow the manual selection of the linking fields. click to continue

  36. At the Is There A Defined Path Between Data Sets prompt, press Return to accept the Y (yes) default. DataExpress will then search for the link between STU-CLASS-D and STU-YRQ-XREF-D as noted at the top of the screen. click to continue

  37. At the Is There A Defined Path Between Data Sets prompt, press Return to accept the Y (yes) default. DataExpress will then search for the link between STU-YRQ-XREF-D and STU-D as noted at the top of the screen. click to continue

  38. At the Alternate Names For Selection Fields prompt, type Y (yes) and press Return to customize the run-time prompt for the YRQ selection field. Note: If fields are specified at the Select By prompt, you will receive this prompt. This allows the option of creating a customized prompt for the field which will be seen when the procedure is executed. This can be helpful if the field name is cryptic or the value to be entered is complex. click to continue

  39. Press return at the CLASS-ITM-NUM, COURSE-ID, and DROP-DATE prompts. At the YRQ prompt, type a customized prompt for the YRQ field. This message will be seen when the procedure is executed (instead of the YRQ prompt). Press return at the CLASS-ITM-NUM, COURSE-ID, and DROP-DATE prompts. click to continue Note: It is particularly helpful to customize the prompt when selecting by date related fields. For example, instead of seeing STU-STRT-DATE, the prompt can be changed to read TYPE STUDENT START DATE (YYMMDD) indicating the appropriate format of the selection entry. click to continue

  40. At the Edit Names/Locations Of Data Bases And Files prompt, press Return to accept the N (no) default. Note: This prompt will always be displayed. Most of the time, the response will be the default of N (no). Only respond with a Y (yes) if group or account location of the databases or data sets needs to be requalified. This is sometimes necessary when sharing procedures from college to college which contain non-standard files (not defined by Dictionary 3000). click to continue

  41. At the Include Database Password(s) In Procedure prompt, press Return to accept the N (no) default. Note: If the database passwords are entered here, they will be embedded in the procedure and the password will not be required at run-time. This will eliminate the security that the database passwords provide. It is not recommended that passwords be entered here. click to continue

  42. At the Enter An Option Number prompt, press Return to provide the run-time option of choosing the output format. Note: Unless the procedure is producing a file to be saved for use in a multi-pass procedure, it is recommended that you press Return to allow the run-time output option. click to continue

  43. At the Run The Procedure prompt, press Return to accept the Y (yes) default. Note: Typing N (no) here will provide the option to save the procedure so that it can be executed at a later date. The procedure may also be saved after it is run. click to continue

  44. At the Enter An Option Number prompt, press Return to accept the default of a Report Listing output. A Report Listing is either sent to a printer or viewed on the screen. Note: This is a repeat of the screen seen earlier, but the procedure is now in run mode. DataExpress is offering the run-time option for output. Helpful Hint: Other common run-time options (for non-multi-pass procedures) are 27 (for Excel), 29 (for Access). click to continue

  45. At the PASSWORD for SM prompt, type the database password for the SM database at your college. Be sure to type in all uppercase lettering. Note: As you type the password, the field will remain blank for security purposes. If you do not know the database password, see your system administrator, IT staff, systems security manager, or computing services staff. click to continue

  46. Once the database password has been entered, prompts will be displayed for those fields that were entered at the Select By prompt. By entering values for each field, the output records are limited. click to continue At the TYPE VALID YEAR QUARTER/S prompt, type A123,A124 to extract only those records whose YRQ value match the specified criteria. click to continue At the and CLASS-ITM-NUM prompt, type 1@ (using the @ wildcard) to limit the extraction to only those records whose class item number falls within the 1000 item number range. click to continue At the and COURSE-ID prompt, press Return to extract all course id’s (ex: ENGL101) within YRQ A123,A124 with a CLASS-ITM-NUM range in the 1000’s. click to continue At the and DROP-DATE prompt, type 000000 (six zeros) to extract only those records where student’s drop date in the class is null. Note: A single 0 will work also. Note: When entering values for the selection fields, valid operators include: LT (less than), LE (less than or equal to), GT (greater than), GE (greater than or equal to), NE (not equal to), EQ (assumed - equal to). The connectors of AND, OR, and TO may also be used to designate ranges. The wildcard symbol @ may be used to specify any characters. The wildard symbol ? designates any single character. click to continue

  47. Based on the selection criteria entered on the previous screen, the records will be read and extracted. At the List Report On Printer prompt, press Return to accept the N (no) default. The output will appear on the screen. Note: When specifying Y (yes) at the List Report On Printer prompt, you will be given the option to send the output to a system or terminal printer. click to continue

  48. At the Page Parts, Multi-Line or Truncate prompt, press Return to accept the default of P (page parts). This will display the report horizontally across the screen in multiple page parts when the report is wider than a single page. Note: The Multi-Line option prints the output to the screen on a single page, with multiple lines per record. This is difficult to read. The Truncate option crops the report to a single line per record on a single page horizontally. For a wide report, some fields will be lost from view. Page Parts is the most commonly used view. click to continue

  49. The output will display on the screen. To navigate up and down use the F1 (Forward) and F2 (Backward) function keys. To navigate horizontally in the report, press the F4 (Left) and F5 (Right) functions keys. Note: SID’s have been blacked out for privacy Note: The total will appear under the field being summarized. Here, a COUNT of 10 SID’s for the item number. Note: The fields for which summary totals were requested will have a <*> under them. click to continue

  50. Note: Average, High, Low CUM-GPA’s for this item number. By pressing the F5 function key, the screen displays page 1B of 181. click to continue

More Related