1 / 27

Bunch Length Measurements in the E167 Experiment

Bunch Length Measurements in the E167 Experiment. Ian Blumenfeld E167 Collaboration SLAC/UCLA/USC. Contents. Introduction Theory CTR and Autocorrelation Practice Interferometry Simulation and Measurement Future. Introduction to Bunch Length Measurements.

Download Presentation

Bunch Length Measurements in the E167 Experiment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Bunch Length Measurements in the E167 Experiment Ian Blumenfeld E167 Collaboration SLAC/UCLA/USC

  2. Contents • Introduction • Theory • CTR and Autocorrelation • Practice • Interferometry • Simulation and Measurement • Future

  3. Introduction to Bunch Length Measurements • Short Bunch in past not important for Particle Physics experiments, so not measured directly • Important for plasma experiment due to need for high peak current

  4. Linear Plasma Theory • According to linear plasma theory the wake amplitude is: • This is optimized for if yielding: • In reality, we are no longer in this regime, but simulations show that this scaling still holds

  5. Previous Methods • E167 Efforts • Streak Camera • Pyroelectric Detectors • Phase space matching • Also: E/O’s, transverse deflection cavities (LOLA), etc. • Desire direct measurement

  6. CTR and Bunch Length • Radiation generated when charged particles moves from one dielectric medium to another • Longitudinal profile of CTR is the same as that of the beam • Coherent for wavelengths longer than bunch length

  7. CTR and Bunch Length (cont’) • Analytically, the radiation intensity is related to the Fourier Transform of the electron number density • Coherence due to interference of electrons in the bunch • Thus CTR spectrum yields information about the bunch

  8. CTR and Bunch Length • We need only measure the longitudinal profile of the CTR for the bunch length • Problem: • We have short bunches, ~10 microns or ~30fs

  9. CTR and Bunch Length • This means no time resolved measurement • Must use interferometry • Like in femtosecond laser pulse measurements • Despite disadvantages of symmetric measurement and averaging

  10. Autocorrelation and CTR • Autocorrelation function gives information on the pulse shape • Width of this function is correlated to the width of the original pulse

  11. CTR Properties • CTR differential energy angular distribution obeys the Ginzburg-Frank Formula

  12. CTR Properties • CTR energy peaks at 1/gamma off the axis of propagation

  13. The Michelson Interferometer • Chose Michelson Interferometer for autocorrelation due to small opening angle • Can easily adjust delay arm with micron precision

  14. sz =9µm The Michelson Interferometer: First Results • First results • Translates to bunch of ~18 microns

  15. Simulation: Understanding the Results • Simulations show that ideal trace does not contain dips apparent in measured spectrum

  16. Material Effects • Turns out materials in interferometer have large effect on trace • E.g. loss of long wavelength generates large dips

  17. Material Effects • Measurements using Bruker interferometer at LBNL in M/FIR show material transmission characteristics • Special Thanks to Michael Martin and Zhao Hao of LBNL and Walt Zacherl of Stanford University for making this happen

  18. Material Properties • Measurements done from 16 microns to ~320 microns • Mylar and TPX appear to have uneven response in this range

  19. Material Properties (cont’) • HDPE possibly good for long wavelength • Silicon has flattest response • ~50% transmission means could be used as beam splitter

  20. Simulation Results • Material effects distort our expected signal • The silicon appears to cause less distortion

  21. The New setup • Used Silicon beam splitter and Vaccum Window, as well as gold coated mirrors • As Silicon is opaque to visible light, had to align with 1.5micron laser

  22. Results s=8.7mm s=14.4mm • Dips now reduced, more features in trace • Experimental Method still rough

  23. Results (cont’) • Features indicate head or tail on beam • As well trace width scales with r56

  24. Next Steps: Further response Studies • Will return to LBNL • Take FIR measurements out to mm range • Take reflectivity measurements • Calibrate pyro detectors and energy meter vs. Bruker

  25. Far Future: Improvements and Single Shot • Next beam access, run current setup in Nitrogen or Helium purge environment • Acquire THz camera, look at radiation properties • Study feasability of single-shot measurement

  26. Conclusion • Have improved bunch length measurement with study of material properties • Will continue to develop this until it is a useful diagnostic tool

  27. U C L A Presented by the E167 Collaboration M. Berry, I. Blumenfeld, F.-J. Decker, P. Emma, M.J. Hogan*, R. Ischebeck, R.H. Iverson, N. Kirby, P. Krejcik, R.H. Siemann, and D. Walz Stanford Linear Accelerator Center C.E. Clayton, C. Huang, C. Joshi*, W. Lu, K.A. Marsh, W.B. Mori, and M. Zhou University of California, Los Angeles S. Deng, T. Katsouleas, P. Muggli* and E. Oz University of Southern California Work supported by Department of Energy contracts DE-AC02-76SF00515 (SLAC), DE-FG03-92ER40745, DE-FG03-98DP00211, DE-FG03-92ER40727, DE-AC-0376SF0098, and National Science Foundation grants No. ECS-9632735, DMS-9722121 and PHY-0078715.

More Related