How to Setup the Linksys Velop AX4200

1. How to Setup the Linksys Velop AX4200 The Linksys Velop AX4200 setup mesh WiFi system is easy to configure and will improve the coverage and functionality of your home network. ● Begin by unboxing the primary node and connecting it to your modem using the provided Ethernet wire. Plug the node into a power outlet and wait for the LED light to turn solid blue signifying that it is ready for installation. ● Next go to the App Store or Google Play and download the Linksys app for your smartphone or tablet. If you don't already have a Linksys Smart WiFi account open the app and create one or log in to an existing one. ● The software will walk you through the entire Linksys velop setup procedure beginning with selecting the kind of internet connection and ensuring that the primary node is properly connected to the modem. Follow the steps to name your network and set a strong password. ● Once the primary node is established you can add more nodes to broaden the network's reach. Place each additional node halfway between the primary node and the

2. location where you require more WiFi coverage. Plug up the node wait for the LED to turn solid blue and then use the app to connect it to your network. ● The app will test the placement of each node to ensure peak performance. You may need to alter the positioning based on app feedback. ● After all nodes have been configured the Linksys app allows you to manage network settings monitor connected devices and activate parental controls. The Linksys Velop AX4200 provides smooth high-speed WiFi coverage across your home. For further information please visit our website. For additional assistance please contact our pros. FAQs for Linksys Velop AX4200 Setup 1. How do I set up my Linksys Velop AX4200? To set up your Linksys Velop AX4200, download the Linksys app, create or log into your account, and follow the in-app instructions to connect and configure your nodes. 2. Do I need an internet connection to set up the Linksys Velop AX4200? Yes, you need an active internet connection to complete the setup process through the Linksys app. 3. Can I use my existing router with Linksys Velop AX4200? Yes, you can set up the Linksys Velop AX4200 in Bridge Mode to work with your existing router. 4. How many nodes do I need for my home? The number of nodes depends on the size and layout of your home. Typically, one node covers up to 2,700 square feet. Larger or multi-story homes may require additional nodes. 5. How do I add additional nodes to my Linksys Velop AX4200 system? To add more nodes, open the Linksys app, go to the setup menu, and follow the instructions for adding a new node. Place the nodes where you need better Wi-Fi coverage. 6. What should I do if my Velop nodes lose connection? If your Velop nodes lose connection, try restarting them by unplugging and plugging them back in. Ensure they are within range of each other and the primary node.

3. 7. How do I reset my Linksys Velop AX4200 to factory settings? To reset your Linksys Velop AX4200, press and hold the reset button on the bottom of the node for about 10 seconds until the light turns red and starts flashing. 8. Can I use wired backhaul with Linksys Velop AX4200? Yes, you can connect your Velop nodes using Ethernet cables for a more stable connection and to free up wireless bandwidth. 9. How do I update the firmware on my Linksys Velop AX4200? Firmware updates are typically automatic. However, you can manually check and update the firmware through the Linksys app under the settings menu. 10. How do I optimize the placement of my Velop nodes? For optimal performance, place nodes in central locations, on elevated surfaces, and away from obstructions like walls and large furniture. Use the app’s signal strength indicator to find the best spots.