1 / 20

An Introduction to Verilog-A: Transitioning from Verilog

An Introduction to Verilog-A: Transitioning from Verilog. Tutorial 1. Lesson Plan (Tentative). Week 1: Transitioning from VHDL to Verilog, Introduction to Cryptography Week 2: A5 Cipher Implementaion, Transitioning from Verilog to Verilog-A Week 3: Verilog-A Mixer Analysis.

lowellg
Download Presentation

An Introduction to Verilog-A: Transitioning from Verilog

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. An Introduction to Verilog-A: Transitioning from Verilog Tutorial 1

  2. Lesson Plan (Tentative) • Week 1: Transitioning from VHDL to Verilog, Introduction to Cryptography • Week 2: A5 Cipher Implementaion, Transitioning from Verilog to Verilog-A • Week 3: Verilog-A Mixer Analysis

  3. Analog Verilog (Verilog-AMS) • Verilog introduced as IEEE Standard 1364 • Dire need for analog circuits to be modelled as a language • VHDL and Verilog come up with analog equivalents: AHDL and Verilog-AMS (Analog and Mixed Signal)

  4. New Types in Verilog-A • Integer/Real (same as Verilog) • Electrical (electrical wire) • Parameter (parameter constants) • Genvar (local variables eg for loops and such)

  5. Parameters • Example: Parameter real gain = 1 from [1:1000]; • Second keyword real specifies optional type (real or integer) • From is used to specifies optional range of the parameter. [] is used to indicate that the end values are allowable while () means end values are not.

  6. Parameters • Parameters cannot be changed at run time, but can be changed at compile time using defparam • Example: module annotate; defparam tgate.m1.gate_width = 5e-6, tgate.m2.gate_width = 10e-6; endmodule

  7. Parameters • Can also exclude ranges, eg Parameter real res = 1.0 from [0:inf) exclude (10:20) exclude 100; • Can be arrayed, eg Parameter real poles[0:3] = {1.0, 2.0, 3.83, 4.0}; • Can be strings, eg Parameter string type = “NPN” from { “NPN”, “PNP” };

  8. Operators • Mostly same as Verilog, but has extra functions for analog design • Built-in mathematical functions: • ln(x), log(x), exp(x), sqrt(x), min(x,y), max(x,y), abs(x), pow(x,y), floor(x), ceil(x) • sin(x), cos(x), tan(x), asin(x), acos(x), atan(x), sinh(x), cosh(x), tanh(x), asinh(x), acosh(x), atanh(x)

  9. Operators (con’t) • Voltage/Current access: • V(b1), V(n1) access the branch voltage and node voltage wrt ground • V(n1,n2) accesses the difference between n1 and n2 • I(b1), I(n1) access the branch current and node current flowing to ground

  10. Operators (con’t) • Voltage/Current access: • I(n1,n2) accesses the current flowing between n1 and n2 • I(<p1>) accesses the current flowing into p1, a port

  11. Analog Operators (Filters) • Cannot be placed in any loop or conditional (for, while, if, case, repeat) because internal state must be maintained • Only in an analog block • Argument list cannot be null

  12. Analog Operators • ddt(x), calculates the time derivative of x • idt(x,opt_ic), calculates the time integral of x (with or without initial condition) • laplace_zp, laplace_zd, laplace_np, laplace_nd (various laplace transforms)

  13. Analog Operators • Analysis types • Analysis() returns true(1) if analysis done is of that type (AC, DC, tran, noise, etc) • Noise models • Can use white_noise, flicker_noise, noise_table

  14. Syntax: analog function real geomcalc; input l, w ; output area, perim ; real l, w, area, perim ; begin area = l * w ; perim = 2 * ( l + w ); end endfunction Called as follows: dummy = geomcalc(l-dl, w-dw, ar, per) ; User-Defined Functions

  15. Signals and Models • Let’s take an example of a resistor (modelled as a voltage-controlled current source) module my_resistor(p,n); parameter real R=1; electrical p,n; branch (p,n) res; analog begin V(res) <+ R * I(res); end endmodule

  16. Signals and Models (con’t) • Other current/voltage sources: • V(out) <+ A * V(in); //VCVS • I(out) <+ A * V(in); //VCCS • V(out) <+ A * I(in); //CCVS • I(out) <+ A * I(in); //CCCS

  17. Signals and Models • RLC Circuit model • Series: V(p, n) <+ R*I(p, n) + L*ddt(I(p, n)) + idt(I(p, n))/C; • Parallel: I(p, n) <+ V(p, n)/R + C*ddt(V(p, n)) + idt(V(p, n))/L;

  18. Simple Amplifier • Example: module amp(out, in); input in; output out; electrical out, in; parameter real Gain = 1; analog V(out) <+ Gain*V(in); endmodule

  19. Example: one-bit DAC module onebit_dac (in, out); input in; inout out; wire in; electrical out; real x; analog begin if (in == 0) x = 0.0; else x = 3.0; V(out) <+ x; end endmodule Note that wires are used with electricals. The digital signals in this context are represented as bits Mixed Signal Models

  20. Conclusions • Verilog is so useful that it has been redesigned for analog/mixed signal applications • Designer Guide (surprisingly easy to read) http://www.designers-guide.org/VerilogAMS/VlogAMS-2.1-pub.pdf

More Related