1 / 57

WiFi in K-12

WiFi in K-12. Design Considerations & Emerging Standards. Wired vrs Wireless. CSMA/CD. Carrier Sense Multiple Access / Collision Detect. Practical limit on 802.3 Nodes per collision domain. Carrier Sensing. Listen before you talk. Multiple Access.

lynna
Download Presentation

WiFi in K-12

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. WiFi in K-12 Design Considerations & Emerging Standards

  2. Wired vrs Wireless

  3. CSMA/CD • Carrier Sense Multiple Access / Collision Detect. • Practical limit on 802.3 Nodes per collision domain

  4. Carrier Sensing • Listen before you talk.

  5. Multiple Access All stations share (access) the common media.

  6. Sharing the Medium • Each station must wait at least 9.6 microseconds between packets • InterPacket Gap (IPG) • Allows receiver to process packet • Also allows everyone a chance to use the medium.

  7. Collision Detection

  8. Listen WHILE WE TALK

  9. How Collisions are Detected.

  10. Collision Detection Recovery • The first station to detect a collision sends a 32 bit ‘Jam’ signal. • All stations stop sending for at least 9.6 microseconds • The two stations that caused the collision then calculate a “Backoff Period” Before retrying.

  11. “Backoff Period” • There are a certain number of availble values for the random backoff period. • Once networks get to about 30 devices, the backoff periods become congested.

  12. Half Duplex (Ethernet on Hubs) • CSMA/CD • Send and Receive share the same bus Half Duplex Collision Domain

  13. Full Duplex (Ethernet on Switches) • Switches Required • Switches create 2 virtual bus’s per connection Collision Domain Collision Domain

  14. CD on Wifi? • 802.11 is Half Duplex • Tx and Rx uses SAME space • A radio can not Transmit and Receive Simultaneously. • Therefore, Collision Detection is not an option.

  15. CSMA/CA • Waits for each frame to be ACKd • If ACK not received, Collusion Assumed • Takes LONGER then CD. • More devices -> More Collisions -> More Wait Time

  16. WifiVrs Wired Conclusion • Back to the rules of Shared Media • Each section of air is Shared Media • Each Channel is a segment (at a certain point.)

  17. RF Engineering

  18. RF • Radio Frequency • 2.6 Ghz, 5.2 Ghz

  19. Characteristics of RF • Knows no boundaries • Unprotected from outside signals • Distance Sensitive • Law of Inverse Square • Regulated differently in each country.

  20. Power Output Levels • More power = More Distance. • Sorta.

  21. Law of Inverse Square

  22. 2.4 Ghz Band • LOTS of interference • Devices operating in the 2.4 GHz range include: • Microwave ovens. • Bluetooth devices. • Baby monitors. • Cordless telephones. • Building Security Systems

  23. NO Overlap between Channels 1, 6, and 11. • All other channels, to bad!

  24. 5 Ghz Band • Relatively unused. • Less Interference. • More Available Channels • Shorter Wavelength = ½ theoretical coverage • Absorbed more readily by solid objects.

  25. 5 Ghz Channels

  26. Line of Sight Transmission

  27. 5 Ghz Conclusion • Pros • More Bandwidth • More Channels • Less Interference • Cons • Less Coverage Area • Lower Penetration The Drawbacks” of 5 Ghz actually HELP K-12

  28. 802.11 Standards

  29. Digital Spread Spectrum

  30. Frequency Hopping

  31. 802.11 Modes • Uses Different Frequency Hopping to pack more of the RF Space. • Therefore, the faster the network, the more “attack surface” for interference it has.

  32. 802.11 Standards • 802.11a up to 54 Mbps in 5 Ghz Band • 802.11b up to 11 Mbps in 2.4 Ghz Band. • 802.11g up to 54 Mbps in 2.4 Ghz Band. • 802.11n up to 600 Mbps via MIMO • Technically supported in 2.4 GHZ. • 802.11ac MultiGbps via MU-MIMO

  33. Spatial Multiplexing

  34. MIMO (Spatial Multiplexing)

  35. Beamforming

  36. 802.11n & 802.11ac • 802.11n • 20 Mhz Channels X 3 Streams = 300 MB • 40 Mhz Channels X 3 Streams = 600 MB • 802.11ac • 80 Mhz Channels x 4 streams = 1.7 Gb • 160 Mhz Channels X 8 Streams = 6.9 Gb • (No chipsets yet bond 160Mhz) Theoretical Bandwidth

  37. 40Mhz channels in 2.4 Ghz

  38. “Exposed Node Problem” Room 106 Room 108

  39. IEEE 802.11 RTS/CTS mechanism helps to solve this problem only if the nodes are synchronized and packet sizes and data rates are the same for both the transmitting nodes. When a node hears an RTS from a neighboring node, but not the corresponding CTS, that node can deduce that it is an exposed node and is permitted to transmit to other neighboring nodes

  40. So….. • Limit Association Rates • Try for uniform Device Radio Types

  41. RF Bandwidth Conention

  42. Multiple Access Points

More Related