1 / 16

Door Details in Masonry

Door Details in Masonry. Masonry Construction. Detailer needs to understand how a door is installed space available (Masonry Opening) Masonry Opening (MO) based on size of masonry units size of joints door size Masonry Openings need to be exact dimensioning is from masonry to masonry.

mahdis
Download Presentation

Door Details in Masonry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Door Details in Masonry

  2. Masonry Construction • Detailer needs to understand • how a door is installed • space available (Masonry Opening) • Masonry Opening (MO) based on • size of masonry units • size of joints • door size • Masonry Openings need to beexact • dimensioning is from masonry to masonry

  3. Modular System • 4” modular system best for masonry construction • Categories or groupings of doors as established by Masonry Design Manual • Group 1 • Door sizes: 2’0, 2’4, 2’8, 3’0 • Group 2 • Door sizes: 2’2, 2’6, 2’10, 3’2 • Don’t mix groups • Either group can be increased by multiples of 4”

  4. --2 3/16” head • 1 3/16” head • --2 3/16” jamb • 1 3/16” jamb • 3 3/16” below floor line w/ 4” block height --2 3/16” below floor line w/ 4” block height Notes: Add 4” for either Group when using 8” block height Group selection will effect foundation design Group 1 vs. Group 2 Doors for 6’8” door with 3/8” mortar joint • Group 2 Scheme A • Group 1 (Scheme A)

  5. buck 1 1/2” nominal 1 3/16” net shim space 1/4” wood spline finished jamb 1” nominal 3/4” net Group 1 - Head Detail (Jamb Sim) Total Head/Jamb =2 3/16”

  6. finished jamb 1 1/2” nominal 1 3/16” net Group 2 - Head Detail (Jamb Sim) Total Head/Jamb =1 3/16” • buck-- none used • shim space--none

  7. Masonry Openings • Group 1 Masonry Width Opening Determination • Step 1--door size + 2* jamb width • Step 2--door size + 2 * 2 3/16 • Step 3(answer)--door size + 4 3/8 = MO • Group 2 Masonry Width Opening Determination • Step 1--door size + 2 * jamb width • Step 2--door size + 2 * 1 3/16 • Step 3(answer)--door size + 2 3/8 = MO

  8. Jamb Anchorage for Group 1 • Bolts directly in grout • Nails at angle Buck must be installed with block work Buck installed with or after block work

  9. Pictorial Jamb Anchorage by bolts

  10. Jamb Anchorage for Group 2 Metal anchors embedded in grout No buck, frame must be installed with block work

  11. Pictorial of Veneer Brick w/ Wood Frame • Code usually requires weight of veneer (brick) not be placed directly on wood frame • Lintel used to support brick • angle iron

  12. Veneer Detail with Wood Frame

  13. Metal Door Frame and Jamb Anchors • A variety of jamb anchors • Usually 14 or 16 gauge steel frames

  14. Pictorial of Metal Door Jamb in Solid Masonry Wall • Jamb must be installed withblock work • Also notice caulking to seal off air infiltration into structure

  15. ASSIGNMENT • Sheet A-8 • Provide Door Type Elevations w/ dimensions • Detail door jambs and header • Use door schedule on page A-10 • Repeat for widow types (must match elevations) HINT: Search Class Architecture Folder

  16. Drafting ExerciseMasonry Door Detail • Profile drawing, use 1/4” diameter anchor bolts • Align both views (In book the alignment is off) • Both details, callout 2-#4 Rebar • Location of dimension for door height is incorrect (HEAD detail), should go to door frame instead of door trim (detail is as per group 2, scheme A) • Finished Head is 1 1/2 x 6 nominal size • There should be no thin lines (JAMB detail) left side of door section

More Related